Schröder, Kai-Uwe 1973-
Kai-Uwe Schröder
VIAF ID: 62635426 ( Personal )
Permalink: http://viaf.org/viaf/62635426
Preferred Forms
- 100 0 _ ‡a Kai-Uwe Schröder
- 100 1 _ ‡a Schröder, Kai-Uwe ‡d 1973-
- 100 1 _ ‡a Schröder, Kai-Uwe ‡d 1973-
4xx's: Alternate Name Forms (5)
5xx's: Related Names (2)
Works
Title | Sources |
---|---|
Additively Manufactured Absorbable Porous Metal Implants Processing, Alloying and Corrosion Behavior | |
Analysis of boundary condition in modelling the low-velocity impact carbon-fiber reinforced polymer composite laminates | |
Ansätze für die zuverlässige Abschätzung der Lebensdauer geklebter Pflaster aus Faserkunststoffverbunden zur Reparatur von Ermüdungsrissen in metallischen Bauteilen | |
Auslegung eines Synchrongelenks für den Einsatz in Schrägachsen-Axialkolbenmotoren | |
A Bayesian Probabilistic Approach for Damage Imaging Utilizing Responses at Vibration Nodes | |
Capability analysis of Puck damage model in predicting the damage behavior of unidirectional composite laminates under different scenarios | |
Comprehensive Comparison of Different Integrated Thermal Protection Systems with Ablative Materials for Load-Bearing Components of Reusable Launch Vehicles | |
Core thickness optimization of buckling‐endangered sandwich columns under compressive loads | |
Crack diagnosis of metallic profiles based on structural damage indicators | |
Crush mechanics of square tubes | |
Delamination Testing of AlSi10Mg Sandwich Structures with Pyramidal Lattice Truss Core made by Laser Powder Bed Fusion | |
Design of a homokinetic joint for use in bent axis axial piston motors | |
Effect of Heat Treatment on Ductility and Precipitation Size of Additively Manufactured AlSi10Mg | |
Energy absorption of re-entrant auxetic structures a parametric study | |
Energy Harvesting for the Supply of Sensors in a Wind Turbine Rotor | |
Energy Harvesting für die Versorgung von Sensorik in einem Windkraftanlagen-Rotor | |
Experimental and FE investigations on the influential parameters in positioning and measurement of strain gauges in adhesively bonded single lap joints | |
finite cell method for the prediction of machining distortion caused by initial residual stresses in milling | |
Finite element applications in structural analysis | |
Fully Modular Robotic Arm Architecture Utilizing Novel Multifunctional Space Interface | |
Functional integration of vehicle body structures into the battery housing | |
Funktionsintegration von Karosserieelementen in das Batteriegehäuse | |
Gust and landing impacts as critical load cases for wings with distributed propulsion | |
Influence of Degradation Product Thickness on the Elastic Stiffness of Porous Absorbable Scaffolds Made from an Bioabsorbable Zn–Mg Alloy | |
Influence of fracture envelope on FE failure load prediction of adhesively bonded joints by using mixed mode bending tests | |
Integration and evaluation of a meander-shaped fibre-optical sensor in GFRP coupons | |
Integration of eddy current sensors into repair patches for fatigue reinforcement at rivet holes | |
IoT-Based SHM Using Digital Twins for Interoperable and Scalable Decentralized Smart Sensing Systems | |
Methodical Development of a Structural Health Monitoring System for COPV Supported by a Digital Shadow | |
Modular simulation methodology for the investigation and optimization of tire road noise transfer | |
Modulare Simulationsmethodik zur Analyse und Optimierung der Reifen-Fahrbahngeräuschübertragung | |
Monitoring multiple damage mechanisms in crack‐patched structures using optical infrared thermography | |
Multi-dimensional wind farm optimization in the concept phase | |
Multi-dimensionale Windparkoptimierung in der Planungsphase | |
Multi-Domain Optimierung von Gussbauteilen in Windenergieanlagen | |
Multi-domain optimization of cast iron components in wind turbines | |
Neue Auslegungsmethode für in der Ebene belastete Gewindeeinsätze in Sandwichprofilen mit Wabenkern | |
New calculation method for in-plane loaded inserts in sandwich panels with honeycomb core | |
Nonwoven-Based Composite Sheets with Constant Areal Weight as Fuselage Skin Material for Light-Aircraft Applications | |
Numerical Analysis of a Mechanical De-Icing Process by Low Frequency Oscillation of a CFRP Layer | |
Numerical analysis of failure and damage | |
Numerical and experimental investigation of debonding accounting for severe fiber bridging | |
Numerical investigations about the use of lattice structures in energy absorbing systems | |
On the phenomenon of impact | |
A parametric study of high velocity impact prediction using the Mie‐Grüneisen equation | |
Potential of Integrated Component-Driven Material Design to Improve Crash Box Performance | |
Potential of Metallurgical Gradients in the Design of Structural Components Made of Nodular Cast Iron | |
A procedure for reduced-order model based robust aeroelastic control | |
Shopfloor suitable damage analysis in CFRP parts with optically tracked ultrasonic measurement technique | |
Simple Progression Law in Predicting the Damage Onset and Propagation in Composite Notched Laminates | |
Stauchverhalten von Vierkant-Hohlprofilen | |
Structural design of Stringer-frame-stiffened shell structures | |
Struktureller Entwurf von stringer-spant-versteiften Schalentragwerken | |
Substructuring methods for efficient prediction of spindle-holder-tool assembly dynamics | |
Substrukturierungsmethoden zur effizienten Prognose der Spindel-Halter-Werkzeug-Dynamik | |
Towards a reliable fatigue life prediction in metallic crack patching | |
Ultraschallbearbeitung von Faser-Kunststoff-Verbunden am Beispiel eines CFK-Überlastsensors | |
Ultrasonic processing of fiber-reinforced composites using the example of a CFRP overload sensor | |
Verfahren zur robusten aeroelastischen Regelung mit Modellen reduzierter Ordnung | |
Werkstattgerechte Schadensanalyse in CFK-Strukturbauteilen mit optisch georteter Ultraschallmesstechnik | |
Young’s Modulus-Independent Determination of Fibre Parameters for Rayleigh-Based Optical Frequency Domain Reflectometry from Cryogenic Temperatures up to 353 K | |
Zum Tragverhalten von Gitterrosten aus glasfaserverstärktem Kunststoff | |
Zur nichtlinearen Berechnung von Stahlbeton- und Verbundbauteilen |