Analyse der wirtschaftlichen und ökologischen Eigenschaften pneumatischer Antriebssysteme mit pneumatischen Druckwandlern |
|
Analysis of the economic and ecological properties of pneumatic actuator systems with pneumatic transformers |
|
Analysis of the influence of bubbly liquids on the dynamics of fluid power systems |
|
B2MML as an exchange format for asset administration shells as part of a plug-and-produce process for a fluid power engineering application |
|
Bio-Based Hydraulic Fluids and the Influence of Hydraulic Oil Viscosity on the Efficiency of Mobile Machinery |
|
Cavitation Erosion Resistance of Additively Manufactured Materials |
|
Challenges and possibilities of the integration of electric drives in mobile machinery |
|
Computational approach to the experimental determination of diffusion coefficients for oxygen and nitrogen in hydraulic fluids using the pressure-decay method |
|
Conceptual Design of Electromechanical Actuation Systems for Large-Sized Directional Control Valves |
|
Control of a Hydromechanical Pendulum with a Reinforcement Learning Agent |
|
Damping strategies for energy efficient pressure controllers of variable displacement pumps |
|
Degradation Identification of an EHA Piston Pump by Analysis of Load-Holding States |
|
Design and experimental investigation of an additive manufactured compact drive |
|
Design study of a high speed power unit for electro hydraulic actuators (EHA) in mobile applications |
|
Development of a transition piece for a self-erecting wind energy plant |
|
Development of a variable compression ratio system for large four-stroke dual-fuel engines |
|
Dominating factors of electrostatic charging in a hydraulic context |
|
Dominierende Faktoren der elektrostatischen Aufladung in einem hydraulischen Kontext |
|
Dynamic Friction Model for the Investigation of Stick-Slip Oscillations |
|
Einflussanalyse blasenhaltiger Flüssigkeiten auf die Dynamik hydraulischer Systeme |
|
Elastohydrodynamic simulation of pneumatic sealing friction considering 3D surface topography |
|
Energy Savings through Adaptive Upstream Throttling and Supply Shut‐Off on Downstream Throttled Drives |
|
Entwicklung einer Hochdrehzahl-Innenzahnradpumpe für die Elektrifizierung mobiler Anwendungen am Beispiel einer autarken dezentralen elektro-hydraulischen Achse |
|
Entwicklung eines Systems zur variablen Verdichtung für Viertakt-Dual-Fuel-Großmotoren |
|
Environment Detection and Trajectory Planning Concept for an Automated Excavator using Open Source Software |
|
Equations for the approximate calculation of forces between cuboid magnets |
|
Erweiterung der Einsatzgrenzen von wasserhydraulischen Kolbenpumpen |
|
Evaluation of a soft sensor concept for indirect flow rate estimation in solenoid-operated spool valves |
|
Experimental Validation of a New Design Concept for the Increase of Efficiency of the Hydraulic Drive System in Mobile Working Machines |
|
Experimentelle und simulative Untersuchung des Kolbentrommel/Steuerspiegelkontaktes in Axialkolbenmaschinen |
|
Extrapolation of Hydrodynamic Pressure in Lubricated Contacts A Novel Multi-Case Physics-Informed Neural Network Framework |
|
Extreme High-Speed Laser Material Application (EHLA)-Coated Carbide-Reinforced Control Plates and Conventional Lead-Based Plates in Axial Piston Machines |
|
Feature Generation and Evaluation for Data-Based Condition Monitoring of a Hydraulic Press |
|
Fluid power: digital, reliable, sustainable 13th International Fluid Power Conference13th-15th June 2022proceedings — Open Access version |
|
Fluidtechnik - Systeme und Komponenten |
|
Functional proof of a flat slide valve as a 4/3-way proportional valve |
|
Fundamentals of Fluid Power Part 1: Hydraulics |
|
High Pressure Falling Cylinder Viscometer - Error Analysis and Improvement Proposal |
|
A Hydraulic Hybrid Architecture combining an Open Center with a Constant Pressure System for Excavators |
|
Hydraulik |
|
Hydraulische Hybridarchitektur aus Open Center und Konstantdruck System für Baggerantriebe |
|
Hydro-Mechanical Closed-Loop Brake Torque Control for Railway Disc Brakes Contribution to the topic novel vehicles and components |
|
Identification of wear progression due to variating operation modes of small high dynamic piston pumps used in frontline flight control application |
|
Increasing the operating range of waterhydraulic piston pumps |
|
Influence of normal force in metallic sealing |
|
Interoperable information model of a pneumatic handling system for plug-and-produce |
|
Investigation of a gasoline engine with exhaust gas condensate water injection system |
|
Investigation of Magnetic Force Hysteresis in Electromechanical Actuators |
|
Leakage of Metallic Ball Seat Valves with Anisotropic Surfaces |
|
Messtechnische Erprobung einer elektro-hydraulischen Linearachse mit High-Speed Antrieb |
|
Methods of Environmental Information Acquisition by Sensor Data and Digital Twins |
|
Micro whistles for signal generation in the range of ultrasound |
|
Mikropfeifen als Signalgeber im Ultraschallbereich |
|
Numerical and experimental study on novel hydraulic pump concept |
|
On the thermodynamic consistency of experimentally determined fluid properties |
|
One dimensional unsteady model of a hydropneumatic piston accumulator based on finite volume method |
|
Optimization of the tribological contact of valve plate and cylinder block within axial piston machines |
|
Physikalisch motivierte, transiente Modellierung translatorischer Hydraulikdichtungen |
|
Prüfverfahren für Schwingungsdämpfer im Fahrzeug |
|
Psychoacoustic Evaluation of Hydraulic Pumps |
|
Reproducibility of falling body viscometry |
|
Reproduzierbarkeit von Fallkörperviskosimetrie |
|
Service-oriented architecture for automated commissioning of fluid power systems |
|
Serviceorientierte Architektur für die automatisierte Inbetriebnahme fluidtechnischer Systeme |
|
Simulation Based Data Sampling for Condition Monitoring of Fluid Power Drives |
|
Surface tension of fuels - Analysis of measurement methods and applicability on rail-pressure environments |
|
A survey of “Industrie 4.0” in the field of Fluid Power - challenges and opportunities by the example of field device integration |
|
Switching procedures of multi-pressure systems for electrified excavators |
|
Test methods for in situ evaluation of vehicle dampers |
|
Tribological investigations on additively manufactured surfaces using extreme high-speed laser material deposition (ehla) and laser powder bed fusion (LPBF) |
|
Tribological Performances of Diamond‐Like Carbon Coatings for Hydraulic Applications |
|
Umdruck zur Vorlesung Grundlagen der Fluidtechnik |
|
Untersuchung eines Ottomotors mit abgaskondensatgespeistem Wassereinspritzsystem |
|
Wassereinzug über ölhydraulische Stangendichtsysteme |
|
Water entrainment via oil-hydraulic rod sealing systems |
|