Céramiques supraconductrices de YBa₂Cu₃O₇-δ : étude de leur réactivité chimique et mise en évidence de mécanismes de texturation en liaison avec le courant critique |
|
Conception et réalisation d'un matériau céramique endommageable : étude du frittage et du comportement à la rupture d'une céramique stratifiée à microstructure duplexe |
|
Contribution à l'étude des jonctions faibles dans les composites supraconducteurs aléatoires : phases au bismuth/argent |
|
Contribution to the study of weak links in random superconductor |
|
Contribution to thermal barrier coating development for space propulsion by liquid feedstock plasma spraying. |
|
Elaboration et comportement magnétique de céramiques YBa₂Cu₃O₇-δ à grains désorientés : influence d'inhomogéneités chimiques |
|
Elaboration of supported catalyts with controlled multiscale architectures for steam reforming processes. |
|
Elaboration of Yb-doped Sc2O3 transparent ceramics for laser applications. |
|
Electroless coating process of carbon nano fibers by copper metal |
|
Etude du coffrittage de matériaux diélectriques et magnétiques pour composants passifs intégrés |
|
Etude d'une céramique de niobate dopée terre rare, Y3NbO7, pour applications optiques |
|
Etude et modélisation des phénomènes chimiques et thermiques menant à l'apparition de contraintes résiduelles et au gauchissement des pièces céramiques crues imprimées via le procédé de stéréolithographie |
|
Étude numérique et expérimentale du frittage à l'échelle du grain |
|
Fabrication of ceramic deposits by cold gas spraying : connection between the powder caracteristics and the physical properties of the coatings. |
|
Fibres de renfort pour composites SiC/SiC : amélioration et corrélation de la durée de vie sous air à T<900°C avec la réactivité chimique |
|
Films diamantés pour applications en packaging électronique de puissance |
|
Formation mechanims of controlled size spherical particles obtained by an aerosol process. Preparation of oxides, characterization and sintering behavior. |
|
Formulation de pâtes céramiques innovantes contenant des composés organiques biosourcés |
|
Frittage des combustibles MOX : influence des conditions d'élaboration et de la pression partielle d'oxygène |
|
Frittage par micro-ondes de céramiques mises en forme par impression 3D |
|
Frittage Ultra-Rapide Pixélisé |
|
Impact des procédés hydrothermaux sur l´aval du cycle du combustible nucléaire : du traitement des combustibles nucléaires à la synthèse des pastilles |
|
Impact of hydrothermal processes on the back end of the nuclear fuel cycle : from nuclear fuels treatment to pellets synthesis. |
|
Influence of the oxygen potential on the microstructure and the homogeneity of fuel U-Pu : U1-yPuyO2±x. |
|
Intensification du procédé de vaporeformage du gaz naturel : fonctionnalisation catalytique d'échangeurs-réacteurs |
|
Interfaces dans les matériaux céramiques multicouches |
|
Investigation of a rare earth doped niobate ceramic for optical applications. |
|
Joining process by microwave heating at moderate temperature of an aluminosilicate ceramic material for radioactive waste containers. |
|
De la maîtrise morphologique de nanoparticules de TiO2 au contrôle du frittage |
|
L'enjeu de la maîtrise des propriétés locales (stœchiométrie, répartition cationique…) lors de la fabrication des combustibles (U,Pu)O₂₋ₓ : potentialités de la microscopie Raman |
|
Maîtrise de l'enduction grande vitesse d'un filament de carbure de silicium par un alliage de titane liquide |
|
Matériaux composites Argent/Carbone à propriétés thermiques adaptatives |
|
Mécanismes de formation par voie aérosol de particules sphériques de taille contrôlée : application à la préparation d'oxydes, caractérisation et comportement au frittage |
|
Microwave sintering of ceramics shaped by 3D printing. |
|
Microwave sintering of zirconia and alumina/zirconia composites : Role of the composition and the architecture of materials. |
|
Modélisation numérique du frittage de particules d'argent aux échelles nano- et micrométriques : étude des mécanismes physiques en jeu et effets des paramètres de process. |
|
Morphological control of TiO2 nanoparticles and their sintering. |
|
MOX dopé chrome : optimisation du dopage et de l'atmosphère de frittage |
|
Nouveaux matériaux pour sources ou amplificateurs laser : les céramiques transparentes laser |
|
Nouvelles céramiques de confinement de plasmas à base de BN issues de précurseurs organométalliques : application aux moteurs à effet Hall |
|
Nuclear fuels in severe accidents : caesium speciation in simulated UO2 fuels densified by SPS. |
|
Nuclear fuels with a fine grain microstructure : innovative processes for high plasticity and strength |
|
Numerical modelling of silver particle sintering at nano- and micro-scale : investigation of the physical mechanisms and effects of the process parameters |
|
Optimisation de multi-matériaux à base de diamant pour la gestion thermique |
|
Oxydo-réduction et spéciation des produits de fission corrosifs dans les combustibles oxydes : évaluation des bénéfices d'un combustible tamponné en pO2 |
|
Preparation and study of fine rare earth oxide powders in relation with sintering. |
|
Préparation et étude de poudres fines d'oxydes de terres rares en relation avec leur frittabilité |
|
Procédé d'assemblage par chauffage micro-ondes à température modérée d'un matériau céramique alumino-silicaté pour surconteneur de déchets radioactifs |
|
Processing and magnetic behaviour of YBa₂Cu₃O₇-δ granular ceramics : influence of chemical inhomogeneities. |
|
Processing of a damageable ceramic material : sintering and failure behavior of a duplex microstructure laminar ceramic. |
|
Processing of titanium-based composite materials with nanosized TiC and TiB reinforcements using different powder metallurgy processes : hydrogenation/dehydrogenation sintering, and severe plastic deformation (Equal Channel Angular Pressing ECAP). |
|
Protection des composites à matrice céramique (CMC) contre la corrosion à haute température dans les moteurs aéronautiques |
|
Réalisation de joint de scellement céramique par projection plasma et caractérisation thermomécanique |
|
Realization of ceramic sealing joint by plasma spraying and thermomechanical characterization. |
|
Relationships between morphological and microstructural characteristics of the U₃Si₂ compound and its elaboration processes. |
|
Role of processing parameters on the physicochemical properties of composites prepared by powder metallurgy : theoretical and experimental studies. |
|
Silver/Carbon composite materials with tunable thermal properties. |
|
Sintering and microstructure control of cermets : reduction, densification, growth. |
|
Sintering of MOX fuels : Influence of fabrication conditions and oxygen partial pressure. |
|
Steam methane reforming process intensification : catalyst functionalization of exchanger-reactor. |
|
Structuration par voie colloïdale de nanopoudres de boehmite à partir de systèmes mixtes organique/inorganique |
|
Study and modeling of chemical and thermal phenomena leading to the appearance of residual stresses and to the curling of green ceramic parts printed using the stereolithography process. |
|
Study of MgAl2O4-supported Pt-Pd catalysts for automotive depollution : synthesis, hydrothermal stability and catalytic performances. |
|
Study of the mechanisms of carbon enrichment in austenite in Q&P steels. |
|
Study of the oxidation behavior of HfB2 (or ZrB2) based-ultra-high temperature ceramics with silicon carbide under molecular and dissociated oxygen. |
|
Study of the reactivity of group IVb metallic dioxides in the presence of carbon by a (micro)-structural approach : Application to the thermodynamic modelling of ternary phase diagrams Me-C-O (where Me = Ti, Zr, Hf). |
|
Study of the self-diffusion and interdiffusion phenomena of plutonium within U₁₋ᵧPuᵧO₂₋ₓ ceramics. |
|
Study of the sintering and shaping of submicron alumina by gelcasting : correlations between monomers, additives and sintered materials properties.. |
|
Study of the sintering of dielectric and magnetic materials for the realization of passive components. |
|
Superconducting ceramics YBa₂Cu₃O₇-δ : study of chemical reactivity and highlighting texturing mechanisms in connection with the critical current. |
|
Synthèse de couches céramiques obtenues en lit fluidisé |
|
Synthèse de matériaux alvéolaires base carbures par transformation d'architectures carbonées ou céramiques par RCVD/CVD : application aux récepteurs solaires volumiques |
|
Synthèse et caractérisation de verres d'oxyde d'argent : évolution sous rayonnements ionisants et structuration multi-échelle par laser femtoseconde |
|
Synthèse et consolidation à basse température de biocéramiques en apatite phosphocalcique carbonatée |
|
Synthèse et fissuration de couches nanométriques d'oxydes métalliques. |
|
Synthèse et propriétés thermochimiques de composites SiC/MAX |
|
Synthesis and characterization of silver-containing glasses : evolution under ionizing irradiation and femtosecond laser multiscale structuring. |
|
Synthesis and characterization of uranium-americium mixed oxides. |
|
Synthesis and Cracking of Metal Oxide Nano-layers |
|
Synthesis of oxide/oxide ceramic composites by film boiling chemical vapor infiltration. |
|
Synthesis of well-defined inorganic layers using fluidized bed |
|
Ultra-Fast Pixelated Sintering. |
|