Gremillard, Laurent, 1975-...
![Sudoc [ABES], France](/viaf/images/flags/SUDOC.png "Sudoc [ABES], France")
Laurent Gremillard personne médaillée du CNRS
VIAF ID: 206996243 (Personal)
Permalink: http://viaf.org/viaf/206996243
Preferred Forms
4xx's: Alternate Name Forms (2)
Works
| Title | Sources |
|---|---|
| 3D-Characterization of the veneer–zirconia interface using FIB nano-tomography |
|
| Additive manufacturing of 3D architectured metallic biomaterials by robocasting |
|
| Assessment of ultrathin yttria-stabilized zirconia foils for biomedical applications |
|
| Atomic scale simulations in zirconia : Effect of yttria doping and environment on stability of phases |
|
| Can (Mg,Y)-PSZ-Spinel composites be a valuable option for dental application? |
|
| Ceramics for medical applications: A picture for the next 20 years |
|
| Characterization of 100Cr6 lattice structures produced by robocasting |
|
| Characterization of materials and their interfaces in a direct bonded copper substrate for power electronics applications |
|
| Combining ageing and wear to assess the durability of zirconia-based ceramic heads for total hip arthroplasty |
|
| Composites made of bioceramic and chitosan physical hydrogel as potential bone substitutes |
|
| Composites organiques-inorganiques poreux pour la substitution osseuse orous organic-inorganic composites for bone substitution |
|
| Degradation of alumina and zirconia toughened alumina (ZTA) hip prostheses tested under microseparation conditions in a shock device |
|
| Développement de composites en zircone renforcée à l'alumine avec des nanofibres de carbone par direct ink writing. |
|
| Direct silanization of zirconia for increased biointegration. |
|
| Dopages de phosphate tricalcique beta et mise en forme de macroporeux par robocasting |
|
| Durability of metal-ceramic employed in power electronics. |
|
| Effect of cooling rate on the location and chemistry of glassy phases in silica-doped 3Y-TZP ceramics |
|
| Effect of different surface treatments on the hydrothermal degradation of a 3Y-TZP ceramic for dental implants. |
|
| Effect of grain orientation and magnesium doping on β-tricalcium phosphate resorption behavior |
|
| Effect of the wick characteristics on the thermal behaviour of a LHP capillary evaporator |
|
| Effects of in vitro shocks and hydrothermal degradation on wear of ceramic hip joints: Towards better experimental simulation of in vivo ageing |
|
| Elaboration de céramiques architecturées pour le stockage d'énergie thermique |
|
| Élaboration d'objets en cuivre par fabrication additive par extrusion de matière : Etude de la faisabilité : cas de pâtes chargées utilisant des hydrogels de polysaccarides comme systèmes liants |
|
| Elaboration et caractérisation de composites Alumine/Zircone à vocation orthopédique |
|
| Elaboration et caractérisation de contacts électriques à base de phases MAX sur SiC pour l'électronique haute température |
|
| Elaboration et étude des propriétés physico-chimiques et biologiques de nouveaux matériaux amorphes bioactifs pyro/orthophosphate de calcium |
|
| Elaboration of 3D bioceramic scaffolds mimicking human bone architecture. |
|
| Evaluation of a new press-fit in situ setting composite porous scaffold for cancellous bone repair: Towards a “surgeon-friendly” bone filler? |
|
| Evidence for the formation of distorted nanodomains involved in the phase transformation of stabilized zirconia by coupling convergent beam electron diffraction and in situ TEM nanoindentation |
|
| Fabrication directe par robocasting de biomatériaux architecturés métalliques. |
|
| Fabrication of Copper objects using extrusion additive manufacturing method : Feasibility study : case of metallic pastes using polysaccharide hydrogels as binding systems. |
|
| Fabrication of hierarchized ceramics for thermochemical heat storage. |
|
| A fast, stepwise procedure to assess time-temperature equivalence for hydrothermal ageing of zirconia-based materials |
|
| A global investigation into in situ nanoindentation experiments on zirconia: from the sample geometry optimization to the stress nanolocalization using convergent beam electron diffraction. |
|
| Ice shaping properties, similar to that of antifreeze proteins, of a zirconium acetate complex |
|
| In vitro evaluation of cell-material interactions on bioinert ceramics with novel surface modifications for enhanced osseointegration |
|
| The in vitro evolution of resorbable brushite cements: A physico-chemical, micro-structural and mechanical study |
|
| Influence of stress and structural parameters on the hydrothermal ageing of zirconia-based ceramics = fluence des contraintes et des paramètres structurels sur la sensibilité au vieillissement des céramiques à base de zircone |
|
| Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia |
|
| Interfaces in graded coatings on titanium-based implants |
|
| L'étude des propriétés de perçage sur biomodèles d'os. |
|
| Low-Temperature Degradation of Zirconia and Implications for Biomedical Implants |
|
| Lumière sur la zircone 3Y-TZP utilisée en implantologie orale : Etude de la relation entre la microstructure et la durabilité |
|
| Mécanisme multiphysique de dégradation des zircones orthopédiques : couplage entre vieillissement hydrothermal et frottement en simulateur de hanche |
|
| Mechanical properties and cytocompatibility of poly(ε-caprolactone)-infiltrated biphasic calcium phosphate scaffolds with bimodal pore distribution |
|
| Microstructural control of modular peptide release from microporous biphasic calcium phosphate |
|
| Microstructural study of silica-doped zirconia ceramics |
|
| Mise en forme par fabrication additive de céramique phosphocalcique mimant l'os humain. |
|
| Modeling and in-situ evaluation of thermal gradients during sintering of large ceramic balls |
|
| Modeling the aging kinetics of zirconia ceramics |
|
| Modélisation atomistique dans la zircone : Rôle du dopage par l'yttrium et de l'environnement sur la stabilité des différences phases. |
|
| Near-infrared radiative properties of porous zirconia ceramics |
|
| A new method to measure monoclinic depth profile in zirconia-based ceramics from X-ray diffraction data |
|
| Out-of-equilibrium bioactive ceramics coatings by Electrostatic Spray Deposition. |
|
| Oxidation of φ′-aluminium oxynitride |
|
| Poudres céramiques sur mesure pour la fabrication additive : De la synthèse à la pièce finale. |
|
| Preparation of porous hydroxyapatite scaffolds |
|
| Printability of ceramics paste : Applications to dense mono and multi materials. |
|
| Relations microstructure-durabilité dans une zircone biomédicale = icrostructure-durability relationships in a biomedical grade zirconia ceramic |
|
| Reliability assessment in advanced nanocomposite materials for orthopaedic applications. |
|
| Revêtements céramiques bioactifs hors d'équilibre déposés par atomisation électrostatique |
|
| Robocast zirconia-toughened alumina scaffolds: Processing, structural characterisation and interaction with human primary osteoblasts |
|
| Role of titanium on the reactive spreading of lead-free solders on alumina |
|
| Sintering behavior of lanthanide-containing glass-ceramic sealants for solid oxide fuel cells |
|
| Sintering behaviour of diopside (CaO∙MgO∙2SiO2)–fluorapatite (9CaO∙3P2O5∙CaF2) bioactive glass |
|
| Spark Plasma Sintering of boron carbide ceramics : numerical modeling of process and optimization of nano,micro-structures to enhance absorber materials behavior in fast neutron reactors. |
|
| Structural transformations of bioactive glass 45S5 with thermal treatments |
|
| Study of drilling properties in bone biomodel |
|
| Study of the reactivity and thermal stability of carbonated phosphocalcic apatites for a controlled sintering of personnalized implants. |
|
| Study on Selective Laser Melting of ceramic material Yttria Stabilized Zirconia. |
|
| Surfaces fonctionnelles modifiées pour augmenter biointégration : Chimie de surface, intégrité mécanique et la stabilité à long terme de céramiques à la base de zircone et d'alumine. |
|
| Tailoring ceramic powders for additive manufacturing : From synthesis to the final part |
|
| A testing protocol combining shocks, hydrothermal ageing and friction, applied to Zirconia Toughened Alumina (ZTA) hip implants. |
|
| The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends |
|
| Thermal shock resistance of two micro-structured alumina obtained by natural sintering and SPS |
|
| Thermomechanical properties and fracture mechanisms of calcium hexaluminate |
|
| Toughening of bio-ceramics scaffolds by polymer coating |
|
| Towards the prediction of hydrothermal ageing of 3Y-TZP bioceramics from processing parameters |
|
| Wear study of Total Ankle Replacement explants by microstructural analysis. |
|
