Caractérisation de revêtements de nitrure d'aluminium obtenus par dépôt chimique en phase vapeur assisté plasma : évaluation de leur comportement sous oxydation |
|
Characterization of aluminium nitride coatings obtained by plasma enhanced chemical vapor deposition : evaluation of their behavior under oxidation. |
|
Contribution to improving the reliability of thermoelectric modules : development of alternative material solutions. |
|
Development of a high temperature anticorrosion coating for steel parts operating until 450°C and complying with REACH regulation. |
|
Development of a single chamber SOFC device for electrical energy production from exhaust gases of a thermal engine. |
|
Development of an 2700°F + capable EBC with enhanced thermochemical and mechanical properties. |
|
Development of glass seals using a sol-gel route in order to elaborate a serial repeat unit (SRU) for solid oxide fuel cells (SOFC) applications. |
|
Development of new anticorrosive coatings on zinc alloys performed by an aqueous or weakly solvated sol-gel route. |
|
Development of new Environmental Barrier Coatings (EBCs) by ElectroPhoretic Deposition (EPD). |
|
Développement de matériaux Ultra-Haute Température : optimisation des propriétés thermomécaniques d'un composite à gradient de propriétés |
|
Développement de nouveaux pré-traitements pour le collage structural des surfaces d'aluminium |
|
Développement de nouveaux revêtements anti-corrosion sur alliages de zinc par des voies sol-gel en milieu aqueux ou faiblement solvanté |
|
Développement de structures poreuses et de membranes denses à base de pérovskites pour la production de combustibles solaires |
|
Développement de verres de scellement par voie sol-gel en vue de l'élaboration d'une Serial Repeat Unit (SRU) pour piles à combustibles SOFC |
|
Développement d'un procédé couplé sol-gel/électrophorèse pour des applications en anti-corrosion |
|
Développement d'un revêtement haute température anticorrosion pour pièces en acier fonctionnant jusqu'à 450 °C et respectant la réglementation REACH |
|
Développement d'une barrière environnementale à tenue thermochimique et mécanique accrue pour des températures de fonctionnement de 2700°F |
|
Développement d'une cellule SOFC de type monochambre pour la conversion en électricité des gaz d'échappement d'un moteur thermique |
|
Dual process for shaping thermal barrier coatings (durability, resistance to CMAS) and repairing damaged thermal barrier coatings. |
|
Durabilité des revêtements de barrière thermique pulvérisé au plasma atmosphérique dopés aux terres rares pour le diagnostic thermique et structurel |
|
Durability of atmospheric plasma sprayed thermal barrier coatings doped with rare earth for thermal and structural diagnosis. |
|
Elaboration and characterization of sol-gel coatings for tribological applications on stainless steel. |
|
Elaboration and functionalization of electrodeposited anticorrosion Zn-Fe coatings. |
|
Elaboration by sol-gel process of anti-corrosion coatings for aeronatutical aluminium alloys : from barrier effect to self-healing. |
|
Elaboration de composites céramiques oxyde/oxyde par caléfaction |
|
Elaboration de nouvelles EBCs par des procédés en voie liquide du type électrophorèse |
|
Élaboration et caractérisation de revêtements anti-corrosion par voie sol-gel sur l'acier inoxydable martensitique X13VD |
|
Elaboration of nanostructured materials for Solid Oxide Fuel Cells : application to Nd2NiO4+d and Ce1-xAxO2-d. |
|
Fonctionnalisation de supports de SiC par imprégnation de sols et-ou de suspensions en vue d'améliorer les rendements de conversion d'échangeurs solaires |
|
Formulation of a new chromium-free conversion treatment for the corrosion protection of aeronautical aluminium alloys. |
|
Influence des conditions de mise en œuvre sur les propriétés de revêtements protecteurs : application à la corrosion sur acier |
|
Influence of monitoring conditions on the properties of protective coatings : application to corrosion on steel. |
|
Influence of the microstructure of environmental barrier coating (EBC) on the phenomenon of oxidation/corrosion. |
|
Introduction of self-healing at high temperature in oxide coatings composites, for applications in severe conditions. |
|
De l'élaboration de composites Cf / UHTCm aux essais hauts flux sous torche oxyacétylénique et plasma |
|
Mécanismes d'endommagement pilotant la durée de vie d'une barrière environnementale (EBC) |
|
Mechanism of electrodeposition process of copper-tin alloys containing gelatin as an additive in acidic solution. |
|
Mise en oeuvre de silicates de terres rares par dépôt chimique en phase vapeur (CVD) pour barrières environnementales de composites à matrice céramique |
|
New composing of coating based on zirconia-rare earth (Y, La, Sm, Er) composite oxidees prepared by the sol-gel route for multilayered thermal barrier coatings applications. |
|
New ultra-high temperature ceramics synthesized by flash sintering : study of oxidation and measurement of thermo-radiative properties under extreme conditions. |
|
Nouveaux revêtements nanocomposites Zn/CeO2 : élaboration, caractérisation, propriétés |
|
Nouvelles céramiques ultra-réfractaires synthétisées par frittage flash : étude de l'oxydation et mesure des propriétés thermo-radiatives en conditions extrêmes |
|
Nouvelles compositions de revêtements de zircone subsituée (Y, La, Sm, Er) élaborés par la voie sol-gel : application aux barrières thermiques multicouches |
|
Nouvelles électrodes à oxygène pour SOFC à base de nickelates Ln2NiO4+δ (Ln = La, Pr) préparées par infiltration |
|
Obtention de revêtements électrochimiques de bronze en milieu acide avec ajout d'additifs organique à base de gélatine |
|
Performance et vieillissement de membranes céramiques à transport d'oxygène |
|
Preparation by sol-gel route and characterization of a metal supported solid oxide fuel cell. |
|
Préparation par voie sol-gel et caractérisation d'une cellule complète SOFC sur support métallique poreux |
|
Procédé dual de mise en forme de barrières thermiques architecturées (durabilité, résistance aux CMAS) et de réparation de barrières thermiques endommagées |
|
Protection contre la corrosion d'alliages de magnésium par des revêtements issus de la voie sol-gel |
|
Reinforcement and functionalisation of aeronautical thermal barrier coating synthesized by sol-gel route : performance in cyclic oxidation and thermal diagnosis. |
|
Renforcement et fonctionnalisation de barrières thermiques aéronautiques élaborées par voie sol-gel comportement en oxydation cyclique et diagnostic thermique |
|
Selective dissolution of corrosion products and coatings from aero-turbine materials by electrochemical methods. |
|
SiC substrates functionalization by impregnation of sols and-or suspensions in order to enhance the solar exchangers conversion efficiencies. |
|
Sol-gel development of new layered thermal barrier coatings to CMAS (Ca, Mg, Al, Si) corrosion : restoration of industrial thermal barrier coatings systems. |
|
Sol-gel route for manufacturing thermal barrier coatings : process optimization and mechanical behaviour. |
|
Stockage de l'hydrogène dans les borohydrures alcalins : hydrolyse du borohydrure de sodium |
|
Synthèse par voie sol-gel et mise en forme de couches épaisses de nickelates de lanthane : applications comme cathodes de piles à combustible SOFC |
|
Synthesis by sol-gel route and processing of lanthanum nickelates thick layers : application as SOFC fuel cells cathodes. |
|
Synthesis of oxide/oxide ceramic composites by film boiling chemical vapor infiltration. |
|