Viguier, Bernard, 19..-....
Viguier, Bernard
VIAF ID: 85948515 ( Personal )
Permalink: http://viaf.org/viaf/85948515
Preferred Forms
- 200 _ | ‡a Viguier ‡b Bernard
- 100 1 _ ‡a Viguier, Bernard
- 100 1 _ ‡a Viguier, Bernard, ‡d 19..-....
Works
Title | Sources |
---|---|
Adaptation du procédé de métallurgie des poudres ISOPREC® aux alliages intermétalliques TiAl en vue de la fabrication de pièces moteurs de formes complexes | |
Adaptation of ISOPREC® powder metallurgy process to TiAl intermetallic alloys for manufacturing complex shape engine components. | |
Analyse des mécanismes métallurgiques survenant dans l'alliage AD730TM au cours du revenu de relaxation des contraintes | |
Caractérisation par MET de fissures de corrosion sous contrainte d'alliages à base de nickel : influence de la teneur en chrome et de la chimie du milieu | |
Caractérisations mécanique et microstructurale de nouveaux alliages de titane présentant une transformation martensitique pour la réalisation d'endoprothèses vasculaires | |
Characterization of crystallographic defects in SEM by electron channeling assisted by high resolution pseudo-Kikuchi patterns : application to IF-steel, UO2 and TiAl. | |
Comportement à haute température du superalliage Udimet 720 élaboré par métallurgie des poudres et optimisé pour la tenue en fluage | |
Comportement mécanique haute température du superalliage monocristallin AM1 : étude in situ par une nouvelle technique de diffraction en rayonnement synchrotron | |
Contribution to the study of precipitation of intermetallic phases in 718 alloy. | |
Creep of dispersion strengthened steels : characterization, modeling and optimization of the microstructure. | |
Diffusion bonded heat exchanger : simulation of deformations and interface mechanical strentgh prediction. | |
Echangeur de chaleur obtenu par soudage-diffusion : simulation des déformées et prédiction de la tenue mécanique des interfaces. | |
Effect of a Prior Plastic Deformation during Heat Treatments on the Mechanical Properties of Ni-Based Superalloys for Turbine Blade Application | |
Effect of substitutional and interstitial alloying elements on the deformation mechanisms and on the mechanical strength of TiAl intermetallics at high temperature. | |
Effet d'une pré-déformation plastique au cours des traitements thermiques sur les propriétés mécaniques des superalliages base Ni pour l'application d'aubes de turbine. | |
Elaboration, aging and damage of thick thermal barriers for turboshaft engines. | |
Elaboration, vieillissement et endommagement de barrières thermiques de forte épaisseur pour turbomoteur | |
Étude de l'alliage de titane TA6V obtenu par fabrication additive : microstructure, élasticité et contraintes résiduelles | |
Étude de l'évolution microstructurale sous irradiation aux ions Ti2+ de deux alliages de titane : lien avec les propriétés mécaniques | |
Étude des mécanismes de déformation et d'endommagement du superalliage à base de nickel MC2 en fluage aux très hautes températures | |
Etude des relations entre microstructure et propriétés mécaniques du nouveau superalliage base nickel AD730™ | |
Etude des transitions volume-surface des propriétés mécaniques du cobalt de haute pureté : influence des mécanismes de glissement et de maclage | |
Étude du comportement viscoplastique en traction et en fluage de l'alliage TA6V de 20 à 600 degrés Celsius | |
Etude expérimentale des systèmes d'étanchéité de type labyrinthe pour turbomachine par l'étude du contact grande vitesse | |
Evolutions de microstructure au cours du forgeage de l'alliage René 65 | |
Évolutions microstructurales de dépôts épais d'acier inoxydable austénitique 316L obtenus par projection dynamique par gaz froid ("cold spray") sous l'effet d'un traitement thermique ; conséquences sur les propriétés d'usage | |
Experimental study of the labyrinth sealing system for turbo-engine by studying high speed interaction. | |
Fluage d'aciers renforcés par dispersion nanométrique : caractérisation, modélisation et optimisation de la microstructure | |
High temperature behaviour of a creep resistant powder metallurgy superalloy Udimet 720. | |
High temperature creep behavior and damage of thin-walled single crystal superalloys : influence of thermal cycling and MCrAlY coating. | |
Laser welding of titanium thin alloy sheets with a Yb source : YAG disc. | |
Mécanismes de déformation plastique aux joints de grains des polycristaux : le cas du couplage cisaillement/migration | |
Mécanismes de fragilisation d'alliages Cu-Zn par l'eutectique Ga-In | |
Mécanismes et mécanique des interactions plasticité-environnement | |
Mechanical and microstructural characterizations of new titanium alloys exhibiting a martensitic transformation for the manufacture of vascular stents. | |
Mechanisms of liquid metal embrittlement of Cu-Zn alloys by liquid Ga-In eutectic. | |
Metallurgical mechanisms upon stress relaxation annealing of the AD730TM superalloy. | |
Microstructural evolution of 316L stainless steel cold spray coatings under heat treatments; consequences on in-use properties.. | |
Microstructural evolution study of two titanium alloys under Ti2+ ion irradiation : Link with mechanical properties. | |
Microstructural evolutions and mechanical behaviour of the nickel based alloys 617 and 230 at high temperature. | |
Microstructure et caractérisation mécanique multi-échelles des composites Al/ω-Al-Cu-Fe synthétisés par métallurgie des poudres | |
Modeling of the mechanical behavior of austenitic stainless steels under pure fatigue and fatigue-relaxation loadings. | |
Modélisation du comportement mécanique des aciers austénitiques inoxydables en fatigue pure et en fatigue-relaxation | |
Modélisation du fluage des superalliages monocristallins : effets d'anisotropie et de microstructure | |
On the Dwell Effect in Ti-6Al-4V : Mechanism in Relation with the Local Crystallographic Orientation of the αp Phase. | |
Phase transformations and oxidation bahavior of Fe-Al alloys. | |
Plastic mechanisms of polycristals' grain boundaries : the case of the shear-coupled migration of grain boundaries. | |
Plastox 2007 | |
Polymères cristaux liquides biomimétiques reproduisant la carapace de scarabées du genre Chrysina : élaboration, structure et propriétés optiques | |
Relations microstructure-propriétés à haute température dans les alliages d'aluminium pour application aéronautique | |
Relationships Between Microstructural Parameters and Mechanical Properties of a new Nickel Based Superalloy AD730™. | |
rheological and microstructural behavior of y/y' Ni-based superalloy under hot forging conditions. | |
Rupture différée en fatigue statique aux très hautes températures (800° - 1300°) des fils Hi-Nicalon, des composites Hi-Nicalon/Type PyC/SiC et des composites Hi-Nicalon/Type PyC/B4C | |
Soudage laser de tôles fines d'alliages de titane avec une source Yb : YAG disque | |
Study of the titanium alloy Ti-6Al-4V obtained by additive manufacturing : microstructure, elasticity and residual stresses. | |
Study of the volume-surface transitions on the mechanical properties of high purity cobalt : effect of the gliding and twinning mechanisms. | |
Study of viscoplastic behaviour by tensile and creep testing of Ti-64 alloy from room temperature to 600°C. | |
TEM characterisation of stress corrosion cracks in nickel based alloys : effect of chromium content and chemistry of environment. | |
Transformation de phases et comportement à l'oxydation d'alliages Fe-Al |