Hirt, Gerhard 1957-
Hirt, G.
Hirt, Gerhard.
Gerhard Hirt Germany karimba ŋun nyɛ doo
VIAF ID: 58613882 (Personal)
Permalink: http://viaf.org/viaf/58613882
Preferred Forms
- 100 0 _ ‡a Gerhard Hirt ‡c Germany karimba ŋun nyɛ doo
- 200 _ | ‡a Hirt ‡b Gerhard
-
- 100 1 _ ‡a Hirt, G.
-
- 100 1 _ ‡a Hirt, G.
-
- 100 1 _ ‡a Hirt, Gerhard
-
- 100 1 _ ‡a Hirt, Gerhard ‡d 1957-
-
4xx's: Alternate Name Forms (6)
5xx's: Related Names (2)
Works
Title | Sources |
---|---|
adaption, evaluation and application of a semi-empirical bond strength model for the simulations of multi-pass hot roll bonding of aluminium alloys | |
Automated through-process simulation with integrated microstructure evolution | |
Automatisierte Prozesskettensimulation mit integrierter Mikrostrukturentwicklung am Beispiel der thermomechanischen Behandlung von Aluminiumwerkstoffen | |
Autonomous agents for the World Wide Lab artificial intelligence in the manufacturing industry | |
Beitrag zur Auslegung und Simulation von Giesswalzprozessen | |
Bending behavior of structured steel sheets with undercuts for interlocking with Al die-cast metal | |
Bonding Experiments at Elevated Temperatures: The Effect of the Sample Storage Time on the Bond Strength of Metals | |
[Il Bravo. Extrait] Air du bravo pour voix de basse ou de baryton [accompagné au piano] "Vieillard farouche..." (Foscari) | |
Characterization Methods along the Process Chain of Electrical Steel Sheet From Best Practices to Advanced Characterization | |
Closed-loop control of product properties in metal forming | |
Computer-Aided Material Design for Crash Boxes Made of High Manganese Steels | |
Copper Clad Steel Strips Produced by a Modified Twin-Roll Casting Process | |
Coupling of an analytical rolling model and reinforcement learning to design pass schedules: towards properties controlled hot rolling | |
Damage dependent material properties in a Finite Element Simulation of a hybrid forward extrusion process | |
Decision Support for the Optimization of Continuous Processes using Digital Shadows | |
Design of Caliber Rolls Incorporating Load Path Dependent Damage Evolution | |
Designing new forging steels by ICMPE | |
Determination of temperature dependent static Young's modulus of refractory ceramics using RUL tests | |
Development of a collaborative online knowledge management system for incremental sheet forming | |
Development of a high-temperature double-layer bulge test for failure prediction in gas-based hot forming of a high-strength aluminium alloy | |
Development of a validation method for multivariate arbitrarily distributed results | |
development of incremental sheet forming from flexible forming to fully integrated production of sheet metal parts | |
Development of levelling strategies for heavy plates via controlled FE models | |
Dynamic strain aging of Al-Mg alloys after severe plastic deformation | |
Enablers and Tools for Agile Product Development | |
FepiM A Novel Inverse Piecewise Method to Determine Isothermal Flow Curves for Hot Working | |
Form Finding of a Sheet Metal Shell by Generative Design and Pareto Optimization | |
Ideen Form geben 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen : Tagungsband | |
Impact of the interaction of material production and mechanical processing on the magnetic properties of non-oriented electrical steel | |
Increasing the energy absorption capacity of structural components made of low alloy steel by combining strain hardening and local heat treatment | |
Influence of intercritical annealing temperature on formability and mechanical properties of medium-manganese-steel in press hardening | |
Influence of pass reduction in cold rolling on damage evolution in deep drawing of rotationally symmetric cups | |
Influence of Warm Rolling on Microstructure and Deformation Behavior of High Manganese Steels | |
Integration of a void healing criterion in multi-scale modeling of hot rolling | |
Inverse modelling approach in 3-point bending for elasto- plastic material parameter identification of thin spring steel | |
Investigation of a composite ring rolling process considering bonding behaviour in FEM and experiment | |
Investigation of correlation between material properties, process parameters and residual stresses in roller levelling | |
Investigation on evolution of microstructure and mechanical properties of heat-treatable 6010-S aluminium alloy during gas-based hot sheet metal forming process | |
Investigation on the cold rolling and structuring of cold sprayed copper-coated steel sheets | |
Investigation on the Influence of Shear on Void Closure in Open‐Die Forging Processes | |
Investigations on Springback in High Manganese TWIP-Steels using U-Profile Draw Bending | |
Material Design for Low-Loss Non-Oriented Electrical Steel for Energy Efficient Drives | |
Materials in the Drive Chain – Modeling Materials for the Internet of Production | |
Mechanism-controlled thermomechanical treatment of high manganese steels | |
Methoden zur Auslegung von robusten Prozessen in der Warmmassivumformung | |
Methods for the design of robust processes in hot forging | |
Model framework for the simulation of microstructure and yield stress during aging of industrial Al-Mg-Si aluminum alloys | |
Modeling and control of tribological properties for subsequent forming process in skin-pass rolling | |
Modeling and exploiting the strip tension influence on surface imprinting during temper rolling of cold-rolled steel | |
Modelling of Hot Flow Stress of Duplex Steel in Dependence of Microstructure Using the Rule of Mixture | |
Modelling of incremental forming processes Final Report of the DFG priority programme SPP 1146, 2003 – 2009 | |
A New Compression-Torsion-Tribometer with Scalable Contact Pressure for Characterization of Tool Wear during Plastic Deformation | |
Numerical and experimental investigations on the springback behaviour of stamping and bending parts | |
On appropriate Finite Element discretization in simulation of gas-based hot sheet metal forming processes | |
Online Model Adaptation in Cold Rolling for Improvement of Thickness Precision | |
Optimizing the microstructure in open-die forgings using reinforcement learning | |
Prediction of Ductile Damage in the Process Chain of Caliber Rolling and Forward Rod Extrusion | |
Preliminary investigations on the applicability of roll forming for the production of bistable thin sheets | |
Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium | |
Procedure to implement shear evolution in fast rolling models with online capability on the example of an aluminum flat rolling process | |
Process strategies and modelling approaches for asymmetric incremental sheet forming : D 82 (Diss. RWTH Aachen) | |
Selbstoptimierende Banddickenregelung zum hochpräzisen Kaltwalzen mit piezoelektrischen Aktoren | |
Self-optimizing automatic gauge control in high precision cold rolling with piezoelectric actuators | |
Semi-solid processing of alloys and composites X, 2008: | |
Simulation-as-a-Service for Reinforcement Learning Applications by Example of Heavy Plate Rolling Processes | |
Special edition: 10th International Conference on Technology of Plasticity | |
Successful Pass Schedule Design in Open-Die Forging Using Double Deep Q-Learning | |
Systematic analysis of the electromechanical contacting of crimp connections by a differentiated investigation of the interstrand and strand/connector resistance relations | |
Systematische Analyse der elektromechanischen Kontaktierung von Crimpverbindungen durch eine differenzierte Untersuchung der Drahtquer- und Leiterkontaktierung | |
Tenth ICTP 2011, Aachen, Germany | |
Thixoforming semi-solid metal processing | |
Toward Holistic Digital Material Description During Press-Hardening | |
transient to steady state: a mobility based approach on dynamic recrystallization ein mobilitätsbasierter Ansatz für die dynamische Rekristallisation | |
Twin Roll Casting and Secondary Cooling of 6.0 wt.% Silicon Steel | |
Umformtechnik Stahl und NE-Werkstoffe ; globale Herausforderungen: neue Märkte für die Umformtechnik ; Tagungsband | |
Untersuchungen zur Herstellbarkeit von frei geformten Hüll- und Fassadenelementen als selbsttragende Struktur ohne Unterkonstruktion aus nichtrostendem Stahl mittels inkrementeller Blechumformung (IBU) = Investigation on the producibility by incremental sheet forming of free form cladding and façade elements as self-bearing structure without substructure made of stainless steel | |
Untersuchungen zur konduktiven Erwärmung für Warmzugversuche an Blechen | |
Verbesserung der Formtoleranzen kaltgewalzter Spaltbänder durch eine piezoelektrisch unterstützte Walzspaltregelung | |
Verfahrensgrenzen und Werkstoffverhalten bei inkrementeller CNC-Blechumformung S 24/10014/01 = Process limits and material behaviour in incremental CNC-controlled sheet metal forming | |
Virtual Production Systems | |
Von der Transiente zum stationären Zustand | |
Voruntersuchungen zur Einsetzbarkeit des Walzprofilierens zur Herstellung bistabiler dünner Bleche |