Acceptabilité de défauts en rupture fragile dans les soudures d'acier pour tubes : modèles FAD et approche locale |
|
Comportement en fluage à haute température dans le domaine biphasé (α + β) de l'alliage M5® |
|
Creep behavior and evolution of microstructure of modified Grade 91 welded joint after short term exposure at 500°C. |
|
Damage of TWIP steels for automotive application. |
|
Effect of welding defects on plastic behaviour and fatigue lifetime of friction stir welded Al-Cu-Li alloy. |
|
Effects of oxidation on high-temperature mechanical properties of alloy 600 : application to cracking in primary water of nuclear pressurized water reactors. |
|
Endommagement des aciers TWIP pour application automobile |
|
Étude de la relation microstructure/ténacité d'aciers maraging inoxydables |
|
Étude de l'influence des défauts de soudage sur le comportement plastique et la durée de vie en fatigue de soudures par friction-malaxage d'un alliage Al-Cu-Li |
|
Etude des mécanismes d'endommagement et de plasticité d'aciers multiphasés à matrice bainitique sous différents trajets de chagement : impact de la température. |
|
Étude du comportement au fluage des gaines en alliage de zirconium pré-oxydées sous sollicitations thermomécaniques représentatives d'un accident de perte de réfrigérant primaire |
|
Étude expérimentale et modélisation de l'adoucissement cyclique des aciers ferritiques-martensitiques revenus. |
|
Étude expérimentale et numérique de l'électro-migration du carbone dans le fer lors de la transformation de phase ferrite - austénite. |
|
Etude expérimentale et prévision des mécanismes de rupture des toles et des joints soudés bout à bout en alliage d'aluminium 6056 |
|
Experimental study and simulation of cyclic softening of tempered martensite ferritic steels |
|
Fissuration à chaud par chute de ductilité dans les métaux d'apport pour le soudage d'alliages à base de nickel |
|
Fluage à 500°C d'un joint soudé d'un acier 9Cr-1Mo modifié - Evolution de la microstructure et comportement mécanique |
|
Fluage isotherme et anisotherme dans les domaines monophasés (α et β) et biphasé (α + β) d'un alliage Zr-1%NbO |
|
Fragilisation du métal liquide entraînant des fissures internes dans les soudures par résistance par points : Occurrence, impact et solutions. |
|
High temperature creep behavior in the (α + β) phase temperature range of M5® alloy. |
|
Hot workability of duplex stainless steels |
|
Identification des conditions de rupture fragile des gainages combustibles en alliage de zirconium oxydés sous vapeur d'eau à haute température et trempés sous charge axiale |
|
Identification of brittle fracture conditions of zirconium alloy fuel claddings oxidized under steam at high temperature and quenched under axial loading. |
|
Impact des carbures sur la variabilité des propriétés en fatigue de superalliages pour disques |
|
Influence des traitements thermomécaniques sur la microstructure et les propriétés mécaniques d'un acier à 9%Cr (Grade 91) |
|
Influence of high hydrogen content, on microstructure and mechanical behaviour, of zirconium alloys fuel cladding upon and after cooling from high temperature. |
|
Influence of micro-alloying on inclusion population, elastoplastic behaviour and ductile fracture resistance of martensitic steels. |
|
Influence of temperature coupling and mechanical loading on the allotropic transformation of polycrystalline cobalt.. |
|
Interactions mécanique-oxydation à haute température dans l'alliage 600 : application à la fissuration dans le milieu primaire des réacteurs nucléaires à eau sous pression |
|
Isothermal and anisothermal creep in the single-phase (α and β) and two-phase (α + β) domains of a Zr-1% NbO alloy. |
|
Kinetics and crystallographic study of the α phase precipitation at β/β grains boundaries in a titanium alloy. |
|
Linking the microstructure to the ductile-to-brittle transition of high strength quenched and tempered steels. |
|
Liquid Metal Embrittlement leading to inner cracks in resistance spot welds : Occurrence, impact and solutions |
|
Matériaux pour l'ingénieur |
|
Mechanical behavior and failure of fuel cladding zirconium alloys in nuclear power plants under accidental RIA-type situation. |
|
Mechanical state study of Nb3Sn conductors during heat treatment for future accelerator electromagnets. |
|
Metallurgical evolution and creep strength of 9-12% Cr heat resistant steels at 600°C and 650°C |
|
Métallurgie et comportement mécanique de structures minces brasées pour la production d'échangeurs thermiques |
|
Metallurgy and mechanical behavior of thin brazed structures for heat exchangers production. |
|
Microstructural evolution of 316L stainless steel cold spray coatings under heat treatments; consequences on in-use properties.. |
|
Microstructural evolution with welding parameters and consequences on the mechanical behaviour of the weld metal of multipass high-strength steel welds. |
|
Microstructure optimization of ferrite-martensite steels with 3.5wt% Mn : from phase transformation to micromechanics. |
|
Multi-scale and in situ study of microstructural evolutions in lath-bainitic steels under isothermal conditions. |
|
Numerical and experimental study of creep of Grade 91 steel at high temperature |
|
Plasticité d'alliages nanorenforcés pour le gainage combustible des réacteurs de 4ème génération : compréhension et modélisation de l'influence des différents paramètres microstructuraux sur le comportement d'alliages modèles |
|
Plasticity and damage mechanisms in specific multiphased steels with bainitic matrix under various mechanical loading paths : influence of temperature |
|
Plasticity of nano-reinforced alloys for the claddings fuels of the fourth generation reactors : experimental and modeling approches of the effect of microstructural parameters for the models alloys behavior. |
|
Quantitative STEM-EDX Analysis of Intergranular Segregation Applied to the Study of Reversible Temper Embrittlement of Bainitic and Martensitic Low Alloy Steel. |
|
Reconstruction of the parent microtexture from the inherited microtexture measured by EBSD : an application to low alloyed steels. |
|
Recristallisation, croissance anormale de grains et microstructure ultra-fine des aciers ODS. |
|
Recristallisation et propriétés mécaniques d'un acier inoxydable austénitique stabilisé au niobium |
|
Recrystallization, abnormal grain growth and ultrafine microstructure of ODS ferritic steels |
|
Recrystallization and mechanical properties of a niobium-stabilized austenitic stainless steel. |
|
Relations between microstructure and bendability on TRIP-aided steels for automotive products |
|
Resistance spot welding of thin coated steel sheets : nugget development in a three-steel sheet assembly. |
|
Restitution de la microtexture parente à partir de la microtexture héritée mesurée par EBSD : une application aux aciers faiblement alliés |
|
Rupture intergranulaire induite par l'hydrogène dans les alliages d'aluminium-magnésium. |
|
Rupture par clivage des aciers inoxydables ferritiques 18Cr-2Mo : influence de la précipitation et de la taille des grains |
|
SCC behavior in PWR environment of alloy 718 components : study of desensitization to SCC by heat treatment. |
|
Simulation numérique et étude expérimentale du fluage de l'acier Grade 91 à haute température. |
|
Soudage par résistance des tôles fines revêtues : formation du noyau dans un assemblage de trois tôles |
|
Study of a "strain-transformable" β titanium alloy : link between mechanical properties, deformation microstructures and fracture mechanisms. |
|
Study of creep behavior of 9% chrome martensitic steel welded joint – Grade 91. |
|
Study of effect of welding on mechanical behavior on nickel alloys. |
|
Study of sensitivity to hydrogen embrittlement of the alloy 718 in primary environment of Pressurized Water Reactor. |
|
Study of the Austenite to Bainite Phase Transformation Mechanisms in Low Carbon Steels. |
|
Study of the creep behavior of pre-oxidized Zy-4 cladding under simulated loss of coolant accident conditions. |
|
Study of the martensitic transformation and reversion process in the PuGa 1at.% alloy. |
|
Study of the mechanical behavior and microstructural evolutions of the austenitic Fe-22Mn-0.6C TWIP steel during complex mechanical loadings : experimental approach and modeling. |
|
Study of the relationship between microstructure and fracture toughness of maraging stainless steels. |
|
Study on the synergies between the additive and the conventional manufacturing processes for the development of high mechanical performance steels. |
|
Synthesis by CVD and characterization of a silicon based coating for an environmental barrier coating. |
|
Titanium matrix composites reinforced with TiB and produced by powder metallurgy : phase transformations kinetics, microstructure formation and mechanical properties. |
|
Transformations de phase, hétérogénéités de microstructure et propriétés mécaniques résultantes dans les aciers martensitiques bruts de trempe et de revenu. |
|
Transition ductile-fragile des aciers pour gazoducs : Étude quantitative des ruptures fragiles hors plan et corrélation à l'anisotropie de microtexture |
|
Viscoplastic behavior of austenitic alloys during recrystallisation under low stresses. |
|