Dessein, Gilles
VIAF ID: 284744494 ( Personal )
Permalink: http://viaf.org/viaf/284744494
Preferred Forms
-
- 100 1 _ ‡a Dessein, Gilles
- 100 1 _ ‡a Dessein, Gilles
- 100 1 _ ‡a Dessein, Gilles
Works
Title | Sources |
---|---|
Advanced modeling of HSM spindle dynamic performances. | |
Amélioration de la précision de robots industriels : Application à l'usinage de pièces composites | |
Amélioration de la productivité en usinage d'un titane réfractaire : le Ti5553 | |
Application du procédé de brunissage à bille sur des pièces à symétrie de révolution pour améliorer leur résistance à la fatigue et leurs propriétés d'usure | |
Application of the vibration-assisted ball burnishing process on rotational symmetric parts to improve their fatigue strength and wear properties. | |
Caractérisation des perturbations d'usinage vers une optimisation du procédé et la mise en oeuvre d'une surveillance de l'usure d'outil dans le cas du TA6V | |
Caractérisation et modélisation des distorsions en tournage de pièces minces en Inconel 718 | |
Caractérisation thermomécanique et identification des endommagements d'un revêtement abradable de compresseurs basse et haute pression en condition de contact sévère | |
Complex surface machining caracterised by an adaptative surface roughness. | |
Conditions de coupe en fraisage à grande vitesse : effet de la variation de la vitesse d'avance | |
Contact à grande vitesse en zone labyrinthe, identification des phénomènes mécaniques et thermiques et du comportement des matériaux | |
Contribution à la modélisation du perçage assisté par vibration et à l'étude de son impact sur la qualité d'alésage : application aux empilages multi-matériaux | |
Contribution à l'optimisation d'un moyen de dépôt de métal par friction et malaxage. | |
Contribution to the modelling of vibration assisted drilling and to the study of its impact on hole quality. | |
Contribution to the optimization of a way of depositing metal by friction stir.. | |
Critères d'optimisation des alliages de TITane pouraméliorer leur USinabilité | |
Cutting conditionsinhigh speed milling : effect of the variationofthe feed rate. | |
Development of a toolpath planning methodology for roughing in five-axis machining. | |
Développement d'une méthodologie de génération de trajectoires d'ébauche en usinage 5 axes | |
Distorsion analysis and modelling in turning of thin Inconel 718 workpieces. | |
Effects of machine behavior and machining parameters on the surface topography in high-speed ball-end milling. | |
Effets du comportement de la machine et des paramètres d'usinage sur la topographie des surfaces obtenues par fraisage à grande vitesse avec des fraises à bout sphérique monoblocs | |
Effets thermomécaniques en usinage à sec : une modélisation analytique-numérique | |
Etude de la découpe de matériau en feuille souple par lame vibrante | |
Etude de l'influence de la structure métallurgique sur l'usinabilité des aciers à hautes caractéristiques mécaniques | |
étude des chargements thermomécaniques induits par le resserrement du trou en perçage du Ti6Al4V sous assistance cryogénique | |
Etude des phénomènes thermo-mécaniques dans le soudage par friction-malaxage : Approches expérimentales et numériques vers des modèles prédictifs. | |
Étude et modélisation du brochage de forme dans un superalliage à base de nickel. | |
Étude et optimisation des processus d'usinage utilisant des dispositifs à amortissement passif | |
Etude expérimentale des systèmes d'étanchéité de type labyrinthe pour turbomachine par l'étude du contact grande vitesse | |
Etude fondamentale de l'assistance cryogénique pour application au fraisage du Ti6Al4V | |
Etude mécanique et métallurgique du perçage d'une nuance d'acier inoxydable austénitique réfractaire | |
Étude mésoscopique de l’interaction mécanique outil/pièce et contribution sur le comportement dynamique du système usinant | |
Experimental analysis and burr formation modeling in the AlSi7Mg0.3+0.5Cu alloy –Application to orthogonal cutting and milling. | |
Experimental developments for kinematic and thermal fields measurements during machining : application to Ti-6Al-4V and Inconel 718 alloys. | |
Experimental study of the labyrinth sealing system for turbo-engine by studying high speed interaction. | |
Experimental study on cutting flexible sheet material using an oscillating knife. | |
Expérimentation et modélisation de la micro-coupe pour une application au micro-fraisage | |
High speed contact in labyrinth area, identification of mechanical and thermal phenomena and of behavior of the materials. | |
Improvement of industrial robot's accuracy : Machining composite parts application. | |
Improving productivity in machining of refractory titanium : the Ti5553. | |
Interaction's processes / structures, ©2013: | |
Machine and Tool dynamic acceptance qualification : Application on milling and reaming process. | |
Machining disturbances characterization to process optimization and tool wear monitoring system for TA6V alloy to process optimization and tool wear monitoring system for TA6V alloy. | |
Maîtrise de l'intégrité de surface par la surveillance d'usinage sur les pièces critiques en superalliage de turbomoteurs aéronautiques | |
Maitrise de l'usinage des superalliages à l'aide d'outils innovants | |
Mechanical and metallurgical study of the drilling of a grade of heat resistant austenitic stainless steel. | |
The mesoscopic study of interaction cuttingtool/working part and contribution on the dynamical behavior of machining system. | |
Modeling of the vibrations assisted drilling process : taking into account the Workpiece-Tool-Machine environment.. | |
Modélisation avancée des performances dynamiques des broches UGV | |
Modélisation de l'intégrité des surfaces usinées : Application au cas du tournage finition de l'acier inoxydable 15-5PH | |
Modélisation du procédé de perçage assisté par vibrations forcées : prise en compte de l'environnement Pièce-Outil-Machine. | |
Numerical prediction of the effect of cutting tool wear on residual stress drift in turning. | |
Optimisation du brochage des alvéoles de disque de turbine | |
Optimization criteria of titanium alloys to improvetheir machinability. | |
Optimization of fir-tree broaching process for turbine disc. | |
Optimization of multi-materials drilling CFRP/Titanium and/or Aluminium. | |
Prédiction numérique de l'effet de l'usure des outils de coupe sur la dérive des contraintes résiduelles en tournage | |
Proposal for monitoring strategies in drilling nickel-based superalloy, application to the tool wear. | |
Proposition de stratégies de surveillance d'usinage en perçage de superalliage base nickel, application à l'usure de l'outil | |
Qualification dynamique de l'ensemble outil-machine : Application au fraisage et à l'alésage | |
Qualification et optimisation de la précision d'une machine-outil à commande numérique | |
Qualification multi-critères des gammes d'usinage : application aux pièces de structure aéronautique en alliage Airware® | |
Study and characterisation of surface integrity modification after ultrasonic vibration-assisted ball burnishing | |
Study and modelling of complex shape broaching operations in a nickel-based superalloy.. | |
Study and optimization of machining processes usingpassive damping devices. | |
Study of the thermo-mechanical phenomena in Friction Stir Welding : experimental and numerical approaches towards predictive models | |
study of the thermomechanical loads induced by hole shrinkage in Ti6Al4V drilling under cryogenic assistance. | |
Study on the influence of the metallurgical structure on the machinability of the High Strength Steels. | |
Surface integrity control by process monitoring on machining critical parts in aeronautical turbine engines superalloy. | |
Thermomechanical characterization and wear mechanisms identifica- tion of a low-pressure and high-pressure abradable coating under extreme. | |
Thermomechanical effects in dry machining : an analytical-numerical modeling. | |
Understanding of superalloys machining using innovative cutting tools. | |
Usinage 5 axes de surfaces gauches caractérisées par un critère d'état de surface adaptatif |