3D thermomechanical modeling of printed circuit board. |
|
500 ans de tribologie de la Renaissance à nos jours actes des [31e] Journées internationales francophones de tribologie, JIFT 2019 [Mame, Cité de la création et de l'innovation, Tours, 24-26 avril 2019] |
|
Analyse de la réponse tribologique d'un contact cylindre/plan soumis à des sollicitations de fretting sous chargement complexe : influence d'une solution Lithium-Bore |
|
Apport d'une réflexion anthropocentrée pour la conception d'appuis dans les transports publics urbains : vers une nouvelle représentation du confort pour le passager |
|
Approche multi physique du contact frottant en grande déformation plastique : prédiction numérique du grippage d'alliages d'aluminium en mise en forme à froid |
|
Caractérisation des variabilités Matériaux/ Process pour une convergence produit de fonderie par approche prédictive |
|
Caractérisation et modélisation du comportement hyper-viscoelastique d'un élastomère chargé pour la simulation de pièces lamifiées élastomère-métal et étude en fatigue |
|
Caractérisation multi-échelle du comportement morpho-mécanique de la fibre capillaire suite à une sollicitation thermomécanique |
|
Characterization and modelling of the hyper-viscoelastic behaviour of a filled rubber in order to simulate elastomer-metal laminated devices and study of fatigue. |
|
Characterization of variability Materials |
|
Cinq cents ans de tribologie |
|
Contribution à la compréhension des liens entre microstructure et propriétés tribologiques d'aciers inoxydables haute dureté après traitements de surface |
|
Contribution hunderstanding the Relationship between Microstructure and Tribological Properties of High Hardness Stainless Steel after Surface Treatments. |
|
Contribution of a human-centered reflection for the design of supports in urban public transports : towards a new representation of comfort for the passenger. |
|
Contribution to the effect of alloying elements on the corrosion duplex grades exposed to environments simulating their application using local probes. |
|
Contrôle du processus permettant la création d'une interface de frottement extrêmement faible pour un système tribologique utilisant un DN gel |
|
Corrosion-abrasion and bacteria induced corrosion of stainless steel AISI 304L (EN 10088 : X2 Cr Ni 18-09) in contact with sugar cane juice |
|
Development of composite cold spray coatings and study of their tribological properties. |
|
Early knee osteoarthritis and knee exo-prosthesis : biomechanical analysis and prototype development. |
|
Effects of small oscillations on wear of rolling contacts with sliding of aeronautical components. |
|
Effets des faibles oscillations sur la dégradation de contacts roulants avec glissement de composants aéronautiques |
|
Elaboration de revêtements composites par cold spray et étude de leurs propriétés tribologiques |
|
Enquête sur le blanchiment de combustion du moteur cryogénique chambre doublure intérieure. |
|
Étude des caractéristiques mécaniques de revêtements projetés par procédés thermiques |
|
Etude des mécanismes d'usure en oxygène liquide |
|
Étude des revêtements électriquement conducteurs produits par projection à froid sur des substrats fragiles et thermosensibles. |
|
Etude du comportement d'aciers inoxydables austénitiques dans les eaux naturelles : corrosion sous contrainte et biocorrosion dans l'eau de l'Oise |
|
Étude du comportement mécanique et tribologique des aciers austénitiques au manganèse : application aux cœurs de voies ferroviaires |
|
Etude théorique du comportement biomécanique de l'articulation trapézométacarpienne |
|
Fretting et fretting-fatigue à haute température d'alliages de titane revêtus |
|
Friction, wear and lubrification of couples of biomaterials : Study of HDPE. |
|
Frottement, usure et lubrification de couples de biomatériaux : Cas du PEHD / zircone et cas de l'acier inoxydable austénitique 316L / zircone |
|
Gant Haptique |
|
Gonarthrose précoce et exo-prothèse de genou : analyses biomécaniques et développement d'un prototype |
|
High temperature tribometry: design and carrying out of a hot test bay : Application to the study of a coated steel (Usibor 1500P) for hot stamping. |
|
Influence du couplage frottement-oxydation sur l'usure d'un acier à outil de travail à chaud : développement d'un tribomètre spécifique au cyclage de matriçage |
|
Influence of enzymatic reactions on the electrochemical behavior of EN X2CrNiMo17-11-2 (AISI 316L) stainless steel in biocorrosion : role of interfacial processes on the modification of the passive layer. |
|
Influence of friction-oxidation coupling on wear of a hot-working tool steel : development of a tribometer dedicated to hot-forging cycling. |
|
Influence of heat treatment of aluminum alloy powders in cold spray coating for additive manufacturing. |
|
Investigation of hybrid plasma spraying process with in situ laser remelting : numerical and experimental methods. |
|
Investigation on blanching on cryogenic engines combustion chamber inner liner |
|
Magnetron sputtering of a hot target of titanium : study of the process and characterization of metal or oxide thin films. |
|
Maîtrise du procédé hybride de projection thermique avec refusion laser in-situ : approches numérique et expérimentale |
|
Modélisation thermomécanique 3D de circuits imprimés |
|
Multiphysics approach of rubbing contact in large plastic strain : numerical prediction of aluminium alloys galling in cold forming. |
|
Multiscale characterization of the morpho-mechanical behavior of human after a thermomechanical solicitation. |
|
No title available. |
|
Optimisation d'électrodes à base de VACNT sur collecteur d'aluminium pour supercondensateurs de hautes performances |
|
Pulvérisation magnétron d'une cible chaude de titane : étude du procédé et caractérisation des couches minces métalliques ou d'oxydes |
|
Research on NiW coatings as a promising replacement for Cr-VI : indentation and X-ray diffraction investigations |
|
Revêtements NiW comme alternative au chromage dur : caractérisation par indentation et diffraction de rayons X. |
|
Rôle de la microstructure sur les mécanismes de corrosion marine d'un dépôt à base d'aluminium élaboré par projection dynamique par gaz froid (« cold spray ») |
|
Running-in control and creation of super low friction interface in water for tribological system using double network gel. |
|
Station de Vieillissement et Corrosion Atmosphérique |
|
Studies of stainless steels of behaviour in natural water: Stress Corrosion Cracking and microbiologically influenced corrosion in the Oise River. |
|
Study of Cu-Sn interdiffusion during the SLID (Solid Liquid Interdiffusion) process in power microelectronics. |
|
Study of electrically conductive coatings produced by cold spray onto brittle and thermosensitive substrate |
|
Study of mechanical and tribological behaviour of austenitic manganese steel : application in railway crossings. |
|
Study of mechanical charactéristics of thermal sprayed coating. |
|
Study of mechanical performance surface of metallic alloys by duplex treatment nitiding-Ion Nanostructuring for biomedical applications (orthopedic). |
|
Study of wear mechanisms in liquid oxygen. |
|
Study the phenomenon of corrosion-erosion of zirconium : case of a jet with particles. |
|
Theoric study on biomechanical behavior of thumb joint. |
|
THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials : selected, peer reviewed papers from the 10th International Conference on Processing and Manufacturing of Advanced Materials, Processing, Fabrication, Properties, Applications, July 09-July 13, 2018, Paris, France |
|
THERMEC 2018, 2018: |
|
Tribological behaviour of lamellate grey cast iron against polytetrafluoroethylenes : Role of wear particles. |
|
Tribology and ageing of bioceramic total hip prostheses, in vitro = in vivo? Scientific and societal issues. |
|
Tribology at high temperature : experimental and numerical analysis of interfacial behavior taking into account the influence of thermomechanical contact conditions. |
|
Tribométrie à haute température : conception et réalisation d'un banc d'essai à chaud : Application à l'étude d'un acier revêtu (Usibor 1500P) pour emboutissage à chaud |
|