Cartographie quantitative de la contrainte dans les matériaux mous par mécanochimie |
|
Chemical degradation of elastomers under mechanical loading : Investigation of a coupling effect. |
|
Comportement mécanique et propriétés à rupture d'un EPDM vieilli par radio-thermo-oxydation : développement d'un outil prédictif basé sur un couplage chemo-mécanique |
|
Comportement mécanique et rupture de l'interface adhésif/substrat d'assemblages collés vieillis en eau : caractérisation expérimentale et simulation numérique |
|
Contribution à l'étude du couplage entre diffusion d'eau et contrainte mécaniques dans les matériaux marins hautes performances. |
|
Contribution to the study of coupling between moisture diffusion and mechanical stress, in high performance marine materials |
|
Control and optimization of laser shock adhesion test on bonded assemblies. |
|
Contrôle et optimisation du test d'adhérence par choc laser sur assemblages collés |
|
Detection of the thermal ageing effect of polymer coatings on plates by acoustic reflectometry. |
|
Durabilité des élastomères thermoplastiques pour applications marines |
|
Durabilité des mousses syntactiques en grande profondeur. |
|
Durability of polychloroprene rubber for marine application |
|
Durability of syntactic foams in deep sea environment |
|
Durability of the permanent paper in archiving conditions. |
|
Effects of polymer ageing on formation and fate of microplastics in sea water. |
|
Effects of vibration welding on the microstructure and tensile behavior of glass fiber reinforced semi-crystalline polymers. |
|
Effet du vieillissement chimique sur le comportement en fatigue et l'endommagement du PA 6,6 renforcé |
|
Effets du soudage par vibration sur la microstructure et le comportement en traction de polymères semi-cristallins renforcés par des fibres de verre |
|
Élaboration de résines époxydes biosourcées poreuses pour le génie civil et caractérisation des propriétés physico-chimiques, mécaniques, acoustiques et thermiques |
|
Etude de l'impact des vieillissements photochimique, thermique et climatique sur les propriétés d'aspect de polypropylènes teintés masse colorés |
|
Etude de l'influence des paramètres d'injection-cuisson sur le comportement mécanique de pièces moulées par injection en élastomère via une analyse physico-chimique de l'état du réseau |
|
Etude de matériaux polymères comme confinement solide dans l'application choc laser LSP |
|
Etude des effets du vieillissement de service sur la résistance en conditions sismiques de mastics de calfeutrement |
|
Etude du vieillissement des disques optiques numériques : recherche de corrélations entre évolution des constituants et perte de l'information |
|
Etude du vieillissement des modules photovoltaïques bi-verre en silicium sous rayonnement UV |
|
Etude du vieillissement thermique de revêtements de peinture sur plaque par réflectométrie ultrasonore |
|
Étude et optimisation de procédés d'encapsulation de cellules photovoltaïques |
|
Evolution des propriétés physico-chimiques et mécaniques de composites à base caoutchoucs lors du photo-vieillissement |
|
Evolution of physico-chemical and mechanical properties of composites based rubber during photo-ageing. |
|
Ferulic acid, glycerol, fatty acids and (bio-)catalysis : an effective combination for the production of new polyphenolic antioxidants and epoxy resins. |
|
Fragilisation du polypropylène induite par oxydation |
|
Fragilisation mécanique du polyamide 11 en condition d'hydrolyse : mécanisme et modélisation |
|
Hydrolysis-Included Mechanical Embrittlement of Polyamides : Mechanisms and Modelling. |
|
Influence du vieillissement des polymères sur la formation et le comportement des microplastiques en milieu marin |
|
Influence of micrometric filler particles on the ageing of polymer-based composites. |
|
Interaction of PEKK and CF/PEKK composites with water and Skydrol. |
|
Kinetic modeling of oxygen absorption by unsaturated esters and linseed oil to be used as oxygen scavengers |
|
Mechanical behavior and in-service life of recyclable composites for nautical applications. |
|
Mechanical behavior of a polyamide 6,6 subjected to thermo-hydro-glycol ageing : Microstructure-property relationships. |
|
Mechanical behaviour and fracture of the adhesive/substrate interface of adhesively bonded joints aged in water : experimental and numerical characterisation. |
|
Mechanical performances of PEKK thermoplastic composites linked to their processing parameters |
|
Micro-texturation de surface du PEEK par laser femtoseconde : étude locale de l'interaction laser-polymère et apport de la texturation de surface aux propriétés tribologiques d'un contact PEEK/PEEK |
|
Modeling of the deformation of resin bonded foundry sand core during casting. |
|
Modélisation cinétique des principes actifs à base de lipides non-saturés pour l'emballage actif. |
|
Modélisation du lissage de défauts sur les optiques asphériques de photolithographie : approche par éléments discrets |
|
Modelling of defect correction on aspherical lithography optics : a discrete element approach. |
|
Multi-Scale Analysis of the Effects of Hydrothermal Fatigue on the Mechanical Behaviour and Damage Mechanisms of Hemp-Reinforced Composites. |
|
Multiscale analysis of the degradation of polymeric ultrafiltration membranes in contact with sodium hypochlorite. |
|
Oxidation induced embrittlement in polypropylene. |
|
Oxydation des nanocomposites à matrice polyoléfinique |
|
Oxydation of Clay Nanoreinforced Polyolefins. |
|
Performances mécaniques de composites thermoplastiques PEKK en relation avec leurs paramètres de mise en œuvre. |
|
Polymères en ambiance nucléaire : comportement à long terme |
|
Polymeric coatings under coupled environmental stresses. |
|
La porosité des résines composites utilisées en odontologie : étude de son origine et évaluation de son influence sur différentes propriétés |
|
The porosity of resin composites used in dentistry : study of its origin and evaluation of its influence on various properties. |
|
Quantitative mapping of stress in soft materials by mechanochemistry. |
|
Renforcement thermomécanique et amélioration des propriétés barrière aux essences du HDPE par des approches (nano)composites |
|
Revêtements polymères sous contraintes environnementales couplées |
|
Simulation de la déformation des noyaux de fonderie durant la coulée |
|
Strengthening and deacidification of cultural heritage papers by polyaminoalkylalkoxysilane copolymer networks. Mechanisms, stability and optimization. |
|
Structure of Polylactide-Based Materials Obtained by Reactive Extrusion : Formation and Thermomechanical Transformations |
|
Study and optimization of encapsulation processes for solar cells. |
|
Study of ageing of biopolymer in marine environment. |
|
Study of aging effects on seismic resistance of caulk mastics. |
|
Study of glass-glass silicon photovoltaic modules ageing under UV light. |
|
Study of impact of photochemical, thermal and climatic aging on appearance properties of mass-coloured polypropylene. |
|
Study of material polymers as confining medium for a Laser Shock Peening application. |
|
Study of natural fibres reinforced composites ageing : building Application. |
|
Study of the ageing of digital optical discs : research into correlations between the evolution of components and the loss of information. |
|
Study of the influence of injection-curing process parameters on the mechanical behaviour of elastomer injection moulded parts via a physico-chemical analysis of the network state. |
|
Thermo-oxidation of epoxy/amine resins. |
|
Thermo-oxidative ageing and fracture behavior of an EPDM. |
|
Thermo-oxidative ageing of an industrial elastomer for anti-vibration automotive applications : characterizations, understanding, design tools. |
|
Thermo-oxydation des polyamides |
|
Thermomechanical reinforcement and improvement of barrier properties to fuels of HDPE by a (nano)composite route. |
|
Thermoplastic Composites for Underwater Applications. |
|
Vieillissement thermo-oxydatif d'un élastomère industriel pour applications automobiles antivibratoires : caractérisations, compréhension, outils de dimensionnement |
|