Liao, Hanlin
VIAF ID: 219461262 ( Personal )
Permalink: http://viaf.org/viaf/219461262
Preferred Forms
- 100 1 _ ‡a Liao, Hanlin
Works
Title | Sources |
---|---|
Contribution à la maîtrise de l'application du procédé de projection thermique arc-fil rotatif en environnement confiné | |
Contribution to study of tribological behavior and mechanical properties of thermoplastic polymers field with solid lubricants in powder. | |
Contribution to the control of the application of the twin wire arc spray process in closed environment. | |
Contribution to the understanding and control of the process of liquid metal atomization jets. | |
Development and characterization of metal oxide semiconductor films deposited by solution precursor thermal spray process | |
Development of Alkaline Electrolyzer Electrodes and Their Characterization in Overall Water Splitting | |
Développement et modélisation de nouveaux matériaux pour piles à combustibles à électrolyte solide. | |
Diagnostic et adaptation des trajectoires robotiques en projection thermique | |
Effect of dry ice blasting on the quality of coatings produced by thermal spraying. | |
Effet de projection de pellettes bioxycarbonées sur la qualité de revêtements élaborés par la projection thermique | |
Elaboration by mechanical alloying and characterization of shape memory alloys NiTi : microsystem applications. | |
Élaboration de revêtements à propriétés tribologiques améliorées pour la réduction des frottements dans le bloc moteur | |
Élaboration "in-situ" par mélanges de poudres de composites à matrice métallique au cours du processus de fabrication additive | |
Elaboration of aluminium alloy metallic matrix composite with cold spray process. | |
Elaboration of coatings wirh improved properties for reducing the friction in the automobile engine. | |
Elaboration par mécanosynthèse et caractérisations d'alliages à mémoire de forme NiTi : application microsystèmes | |
Elastic and plastic behavior of thermal spray coatings : characterization method development for mechanical properties and comparisons with properties determined by indentations tests. | |
Etude de la perméation de gaz et de la conductivité ionique des revêtements de zircone stabilisée à l'yttrium réalisés par projection plasma pour piles à combustible à oxyde solide | |
Etude de l'influence des conditions de projection thermique sur les propriétés mécaniques de revêtement cermets | |
Étude du comportement tribologique en régime lubrifié de revêtements cold spray composites à base d'acier | |
Etude du développement de la projection plasma sous très basse pression | |
Etude sur l'élaboration et la caractérisation de revêtements en alliages d'aluminium et de magnésium par projection dynamique à froid pour la réparation de pièces aéronautiques | |
Etudes des procédés d'élaboration et des propriétés des revêtements de PEEK et de ses composites | |
"in-situ" preperation of metal marix composites by additive manufactureing process with powder mixture. | |
Influence of microstructure on thermomechanical damage mechanisms in cold-sprayed 316L-matrix composite coatings. | |
Inter cold spray process and caracterization of obtained coatings : application to automotive engine. | |
La2Zr2O7 compouds elaborated by solution precursor plasma spraying and soft chemistry : spatial engine applications. | |
Maîtrise structurale de matériaux par fabrication additive en vue d'applications bio-médicales | |
Manufacturing and characterization of Al matrix composites with nano reinforcements via cold spraying | |
Microstructural control of materials using additive manufacturing for biomedical application. | |
Microstructure and wear behavior of novel High-strength Al-Cu-Mg based alloy fabricated by laser powder bed fusion. | |
Microstructure et comportement à l'usure d'un nouvel alliage à base d'Al-Cu-Mg à haute résistance fabriqué par fusion sur lit de poudre laser. | |
Modeling and development of new materials for fuel cells solid electrolyte | |
Modélisation et Planification de Processus pour la Fabrication Additive Basé Robotique-Projection à Froid. | |
New ways of manufacturing metal alloys with high performance from powders. | |
Nouvelles solutions de préparation et d'activation des surfaces : assemblages époxy-fonte | |
Nouvelles voies de fabrication d'alliages métalliques à hautes performances à partir de poudres | |
Optimisation et amélioration d'un nouveau procédé HVOF alimenté à l'éthanol. | |
Optimization and Improvement of a Novel HVOF Process Fueled with Ethanol | |
Photocatalyseurs hétérostructurés LaFeO₃/g-C₃N₄ pour la production d'hydrogène | |
Procédé de fabrication additive et caractérisation des alliages magnétiques doux Fe-Si. | |
Procédé de projection à froid interne et caractérisation des revêtements résultants : application au moteur d'automobile | |
Process Modeling and Planning for Robotic Cold Spray Based Additive Manufacturing | |
Recherche et mise en œuvre de modèles de réseaux de neurones artificiels pour la projection thermique à flamme d’oxygène à haute vitesse (HVOF).. | |
Recherche et réalisation du système assistant de la programmation hors ligne en projection thermique. | |
Research and implementation of artificial neural networks models for high velocity oxygen fuel thermal spraying | |
Revêtement anti-usure déposé par projection plasma sur matériaux composites fibres de carbones/matrice époxy pour applications aéronautiques | |
Robot off-line programming and real-time monitoring of trajectories : development of an add-in program of robotstudio for the thermal spraying. | |
Robot off-line programming with a mesh-based method and thermal simulation of the thermal spray process. | |
Selective laser melting - influence of atmosphere and realization of in-situ fonction alloy. | |
Study of the generation of lateral surface topographies from the LPBF process for an AlSi10Mg aluminum alloy. | |
Study of the insertion of a multi-material compatibility interface for laser spray coating combining immiscible metals.. | |
Study of thermoelectric properties of the coatings of β-FeSi2 type materials. | |
Study on Development of Very Low Pressure Plasma Spraying. | |
Study on preparation and characterization of aluminum alloy and magnesium alloy coatings for the repair of aircraft parts using cold spray process. | |
Study on Selective Laser Melting of ceramic material Yttria Stabilized Zirconia. | |
Study on Selective Laser Melting of Ti-6Al-4V alloy for biomedical applications | |
Study on the elaboration and properties of PEEK and its composite coatings. | |
Study on the gas permeation and ionic conductivity of plasma-sprayed yttria stabilized zirconia deposit for solid oxide fuel cells. | |
Study on the influence of thermal spraying conditions to the mechnical properties of cermet coatings. | |
Synthèse et caractérisation de revêtements de silicates de lanthane de structure apatite élaborés par projection plasma dédiés aux piles à combustibles IT-SOFCs | |
Synthesis and characterization of apatite-type lanthanum silicate (ATLS) deposited by atmospheric plasma spraying as a novel electrolyte at intermediate temperature solid oxide fuel cells (IT-SOFCs). | |
Tribological behavior of steel-based cold spray composite coatings. | |
Understanding the implementation in additive manufacturing of high carbon steels such as 100Cr6 by laser powder bed fusion. |