Contribution à la compréhension des mécanismes de vieillissement hydrothermique de matériaux composites unidirectionnels polyester insaturé/fibre de lin |
|
Contribution to predictive and experimental modelling choices with respect to the design of multiscale structures with uncertainties. |
|
Contribution to the investigation of the compressive strength and delamination of continuous fibers laminated composites in the context of competitive sailing. |
|
Contribution to the study of some parameters influencing the mechanical properties of elementary flax fibers : Correlation with the properties of composite materials.. |
|
Contributions of the comparative analysis of fragmentation and debris generation processes to the understanding of the behaviour of aeronautical composite structures under crushing. |
|
Développement de formulations analytiques pour déterminer la réponse dynamique de plaques composites immergées soumises à des explosions sous-marines. |
|
Développement d'un procédé d'enroulement filamentaire adapté aux matériaux composites sandwich et caractérisation mécanique des matériaux |
|
Développement d'une chaine de traitement d'images pour relier la morphologie de fibres lignocellulosiques aux propriétés de composites thermoplastiques à fibres courtes |
|
Durability study of composites based on a flax/polypropylene fabric developed by a new thermocompression process. |
|
Effect of voids in thick-walled pressure vessels : Experimental observations and numerical modelling |
|
Effets de chargements thermocinétiques sur le comportement mécanique d'un composite stratifié à résine thermoplastique. |
|
Efficient high speed machining based on operational identification of dynamic behavior and optimization of workpiece holder. |
|
Elaboration d'un outil numérique reliant les échelles micro/méso d'un composite thermoplastique sensible à l'humidité et à la température en quasi-statique |
|
Endommagement du composite carbone/carbone et de la liaison composite/cuivre dans les composants à haut flux pour la fusion contrôlée |
|
Etude de comportement en fatigue des composites renforcés par fibres végétales : prise en compte de la variabilité des propriétés |
|
Etude de la durabilité des composites lin/PP à base de tissu comélé élaborés par un nouveau procédé de thermocompression |
|
Étude de la durabilité d'un matériau composite bobiné sous chargements sévères |
|
Étude du comportement mécanique en fatigue et à l'impact du composite lin/ Elium |
|
Etude expérimentale du comportement d'une poutre en béton armé en flexion trois points réparée par matériaux composites (approche probabiliste) |
|
Étude expérimentale et simulation numérique de l'usinage des matériaux en nids d'abeilles : application au fraisage des structures Nomex® et Aluminium |
|
Étude stochastique de l'impact des défauts de porosités et de plissements dans les matériaux composites |
|
Experimental study and modelling of the durability of flax fibre reinforced biocomposites. |
|
Experimental study of short reinforced concrete beam behavior repaired by two fiber reinforced polymer methods though three points bending test (probabilistic approach). |
|
Fatigue of sandwich structures subjected to slamming – Development of new testing methods. |
|
Fibre-dominated fatigue failure in CFRP composite laminates. |
|
Forming analysis of composite reinforcements using natural fibers. |
|
From plant to hemp biocomposites : Characterization of multiple interfaces and study of relevant parameters.. |
|
Gouttes millimétriques d'eau en milieu confiné : comportement au cours du séchage |
|
Identification of dynamic properties via a method based on Force Analysis Technique : application to flax fibre reinforced PA11 |
|
Influence de l'endommagement sur la perméabilité des matériaux composites : application à la conception d'une capacité cryogénique sans liner |
|
Influence de traitements physico-chimiques des renforts sur le comportement mécanique des composites à base de co-produits de bois |
|
Influence of physico-chemical treatments of the reinforcements on the mechanical behaviour of wood-polymer composites. |
|
Investigation of environmental effects on impact damage tolerance of composite laminates. |
|
A kinetic damage model to predict the lifetime of 3D woven composite for cyclic fatigue and complex fatigue loads. |
|
Manufacturing and mechanical characterization of a bio-based composite sandwich structure. |
|
Matrix cracking in CMC : relations with the microstructure and the mechanical behaviour. |
|
Mécanismes de fatigue dominés par les fibres dans les composites stratifiés d'unidirectionnels |
|
Methotological aspects of the characterisation of compressive strength of fiber reinforced composites. |
|
Microfissuration des CMC : relation avec la microstructure et le comportement mécanique |
|
Millimetric water drops in confined spaces : behavior during drying. |
|
Modélisation discrète et étude expérimentale du comportement de matériaux sandwichs à peaux minces architecturées sous impact basse vitesse |
|
Modélisation et caractérisation mécanique d'un composite bio-sourcé par mesures de champs cinématiques sans contact. |
|
Modélisation numérique d'assemblages collés : application à la réparation de structures en composites |
|
Numerical simulation of adhesive joint : application to the repair of composite structures. |
|
Prediction of lifetime in static fatigue, at high temperatures for ceramic matrix composites. |
|
Prediction of low velocity and low energy impact damages in carbon/epoxy laminates. |
|
Prévision de la durée de vie des composites à matrice céramique auto cicatrisante, en fatigue statique, à haute température (= 800°C) |
|
Prévision des dommages d'impact basse vitesse et basse énergie dans les composites à matrice organique stratifiés |
|
Probabilistic approach for fatigue life estimation of wind turbine blades using deep neural network |
|
Reliability-mechanical behavior of composite structures - materials approach. |
|
Représentation de la variabilité des propriétés mécaniques d'un CMO à l'échelle microscopique : Méthodes de construction des distributions statistiques |
|
A smart composite based on carbon fiber and epoxy matrix for new offshore wind-turbines. Multi-scale numerical and analytical modelings |
|
Smart matériaux composites : nouvelles approches et performances |
|
Une stratégie d'identification multi-échelles générale pour la caractérisation du comportement des matériaux hétérogènes. |
|
Study and modelling of the mechanical behaviour of oxide/oxide CMCs. |
|
Study of fatigue behavior of plant fiber reinforced composites : taking into account the variability of properties. |
|
Study of structure and behaviour of gypsum based materials under fire condition. |
|
Study of the durability of a wound composite material under severe loads. |
|
Study of the low velocity impact and post-impact behaviour of composite materials reinforced with plant fibres. |
|
Thermal ageing of HNBR mixtures crosslinked with peroxide - Kinetic modeling - Influence of a hydrocarbon fluid. |
|
Thermo-mechanical behavior of a thermoplastic reinforced with glass fibers under cyclic loadings. |
|
Thermomechanical behavior analysis of a 3D-C/C composite from 25°C to 1000°C : in-situ tests and numerical simulation. |
|
Understanding the effect of decorticatio on the morphology, properties and mechanical behavior of flax fibers : investigation of a flax/epoxy composite material. |
|
Understanding the hydrothermal aging mechanisms of unsaturated polyester-reinforced flax fiber unidirectional composites. |
|
Usinage à grande vitesse efficace basé sur l'identification opérationnelle du comportement dynamique et l'optimisation du support de pièce |
|
Vers une maîtrise des incertitudes en calculs des structures composites |
|
Vieillissement thermique de mélanges HNBR réticulés au peroxyde - Modélisation cinétique - Influence d'un hydrocarbure |
|
Virtual tool linking the micro/meso scales of a thermoplastic composite affected by hygrome-try and temperature for quasi-static loading. |
|
Wet ageing of helicopter blade composite materials : multiscale characterizations and simulations, from the resin to the multi-material assemblies. |
|