Accroitre ses performances en haltérophilie : La biomécanique pour un entrainement optimisé. |
|
Analyse du design et de la morphologie des stents pour la prévention des risques de migration et d'endofuite de type 1a : Une étude numérique pour l'anévrisme de l'aorte thoracique. |
|
Analyse théorique et experimentale de la dynamique de rotor sur paliers à feuilles lubrifié par l'air |
|
Analyse tribologique du contact siège-soupape d'un moteur diesel |
|
Analysis of personalized mechano-bio-faithful radio-cephalic arteriovenous Fistula |
|
Angiovision - Installation of aortic stent increased by angionavigation. |
|
Angiovision - Pose d'endoprothèse aortique par angionavigation augmentée |
|
Biomechanical behavior of carotid atherosclerosis : A numerical approch |
|
Caractérisation et modélisation du comportement mécanique in vivo de la peau |
|
Caractéristiques d'une butée de turbocompresseur : Approches numérique et expérimentale |
|
Characteristics of a turbocharger thrust bearing : Numerical and experimental approaches. |
|
Characterization and modeling of human skin behavior in vivo. |
|
Chirurgie endovasculaire virtuelle : Application à la dissection aortique. |
|
Comportement biomécanique de l'atherosclérose carotide : Une approche numérique. |
|
Computer aided surgery : Application to aortic dissection |
|
Conception d'un simulateur in vitro pour l’étude des écoulements hémodynamiques sur fantôme d'aorte : application à la dissection aortique. |
|
Contributii privind perfectionarea sistemelor mecatronice moderne destinate recuperarii medicale a membrului inferior |
|
Contribution à l'étude de l'influence de la rugosité et des effets non-Newtoniens dans les contacts sévères lubrifiés = ntribution to the study of the influence of roughness and the effects non-Newtonian in the lubricated severe contacts |
|
Contribution à l'étude du comportement d'une endoprothèse aortique abdominale analyse des endofuites de type I = A contribution to the study of abdominal aortic endograft : Analysis of type I endoleaks |
|
A contribution to the plasto-hydrodynamic lubrication study. |
|
Contributions à l'amélioration des systèmes mécatroniques modernes pour la réadaptation médicale du membre inférieur. |
|
Contributions to modern mechatronic systems improvement for medical rehabilitation of the lower limb. |
|
Contrôle du processus permettant la création d'une interface de frottement extrêmement faible pour un système tribologique utilisant un DN gel |
|
Document de synthèse pour obtenir l'habilitation à diriger des recherches |
|
Dynamics of rotors on refrigerant-lubricated gas foil bearings |
|
Estimation de la fiabilité d'un palier fluide |
|
Estimation du mouvement de la paroi carotidienne en imagerie ultrasonore par une approche de marquage ultrasonore |
|
Etude dynamique d'un palier compliant lubrifié à l'aide de fluide réfrigérant |
|
Etude numérique et expérimentale des paliers hydrodynamiques lubrifiés à l'eau. Application aux lignes d'arbres de propulsion navale. |
|
Étude théorique et expérimentale des systèmes d'étanchéité par joints pneumatiques |
|
Etude tribologique d'une butée aérodynamique en régime supersonique |
|
Finite elements in tribology |
|
In vitro circulatory mock loop study of non-Newtonian hemodynamics in aorta phantoms : application to aortic dissection |
|
Increasing lifting performances : Biomechanics for an optimized training |
|
Influence de l'hétérogénéité des propriétés mécaniques sur la résistance de l'os trabéculaire humain |
|
Influence of bone tissue heterogeneity on the strength of human trabecular bone. |
|
La lubrification à basse pression par la méthode des éléments finis. Application aux paliers |
|
Modeling of a planetary gearbox hydrodynamic journal bearing under severe operating conditions. |
|
Modélisation d'un palier hydrodynamique de réducteur épicycloïdal opérant en conditions sévères |
|
Modélisation et caractérisation expérimentale des étanchéités faciales hydrodynamiques |
|
Modélisation expérimentale de phénomènes électrostatiques et tribologiques aux interfaces solide/solide |
|
Modélisation poroélastique multiéchelle de l'os. |
|
Morphological and stent design risks factors to prevent migration phenomena and type 1a endoleak for a thoracic aneurysm : A numerical analysis |
|
Motion estimation of the carotid wall in ultrasound imaging using transverses oscillations. |
|
Multiscale poroelastic modeling of bone |
|
Numerical and experimental study of water lubricated journal bearings. Application to marine shaft lines.. |
|
Optimisation de la lubrification des paliers de tête de bielle : démarche méthodologique |
|
Optimization of the conrod bearing lubrication : methodological approach. |
|
Patient-specific virtual endovascular surgery : Application to the Thoracic Endovascular Aortic Repair (TEVAR). |
|
Procedures for the rheological characterization of the nonlinear behaviour of complex fluids in shear and squeeze flows |
|
Proceduri pentru Caracterizarea Comportamentului Reologic Neliniar alFluidelor Complexe în Mişcări de Forfecare şi Expulzare. |
|
Recherche sur l'optimisation des prothèses personnalisées. |
|
Recherche sur l'usure start-stop et le comportement de glissement thermique à l'interface de revêtement de film des roulements à grande vitesse et à forte charge. |
|
Research on optimizing customized prostheses |
|
Research on the start-stop wear and thermal slip behavior at film-coating interface of high-speed and heavy-load journal bearings |
|
Running-in control and creation of super low friction interface in water for tribological system using double network gel. |
|
Structural and mechanical characterization of skeletal muscle with spastic myopathy post stroke.. |
|
Study of the hydrodynamic behavior of the viscoseal. Sealing characterization. |
|
Surface wave's contribution to viscoelastic palpation of pathological and healthy cutaneous tissue |
|
Theoretical and experimental study of pneumatic sealing systems. |
|
Theorical and experimental analysis of rotor dynamic on airfoil bearings. |
|
Tribological analysis of the valve-seat contact of a diesel engine. |
|
Tribological characterization of heavily loaded oscillating bearings in aeronautics : Dependence of lifecycles and contact accommodation mechanisms on grease lubrication |
|
Tribological study of an aerodynamic thrust bearing in superconic regime. |
|
Tribologie et perception tactile de surfaces texturées |
|
Validity study of the sum surface concept using a statistical approach of elastic contact between two rough surfaces. |
|
Vérification de la validité du concept de surface somme par une approche statistique du contact élastique entre deux surfaces rugueuses |
|