CMOS integrated optical gate driver for power transistors. |
|
Commande optique intégrée en technologie CMOS pour les transistors de puissance |
|
Composants à semi-conducteur pour l'électronique de puissance |
|
Conception caractérisation et mise en oeuvre d'un circuit intégré type driver en CMOS pour composants GaN |
|
Conception de l'installation électrique de l'hôtel Mak Palace - Liban, Hamra |
|
Conception et caractérisation d’un onduleur de courant triphasé à base de semi-conducteurs SiC 1,7kV pour l’application photovoltaïque. |
|
Conception et fabrication de dispositifs bipolaires haute tension basés sur 4H-SiC. |
|
Contribution à la caractérisation de l'IGBT en commutation à zéro de courant |
|
Contribution à la conception, par validation numérique et expérimentale, et l'optimisation pour l'aéronautique de contacteur hybride haute tension DC |
|
Contribution à l'étude de la durée de vie des assemblages de puissance dans des environnements haute température et avec des cycles thermiques de grande amplitude |
|
Contribution à l'étude des mécanismes de défaillances de l'IGBT sous régimes de fortes contraintes électriques et thermiques |
|
Contribution au développement du transistor bipolaire à fort gain et d'un interrupteur bidirectionnel à quatre quadrants |
|
Contribution to study of lifetime duration of power assemblies in high temperature environments with a thermal cycling of great amplitude. |
|
Contribution to the characterisation of the IGBT in zero current switching mode. |
|
Contribution to the design, by numerical and experimental validation, and optimization for aeronautics of DC high-voltage hybrid contactor. |
|
Contribution to the design of parallel multilevel inverters : Comparison of topologies and analysis of imperfections in magnetic couplers. |
|
The contribution to the development of the super-gain BJT and of a four-quadrants bidirectional switch. |
|
Contribution to the estimation and to the improvement of the photovoltaic energy production. |
|
Contribution to the study of failure mecanisms of the IGBT under high electrical and thermal stresses. |
|
Contribution to the study of the effect of ageing of the power modules on their electrothermal behavior. |
|
Crise de la connaissance et connaissance de la crise : les points de vue du Conservatoire national des arts et métiers |
|
Design and characterization of a three-phase current source inverter using 1.7kV SiC power devices for photovoltaic applications |
|
Design, conception, and fabrication of high-voltage bipolar devices based on 4H-SiC |
|
Développement d'un Driver Communicant pour MOSFET SiC |
|
Driving and monitoring of SiC power MOSFETs : Integration of smart features in gate drivers. |
|
Dynamic calorimetric methods for estimating power losses in power semiconductor devices. |
|
Élaboration et comparaison de deux modèles de durée de vie des fils d'interconnexion des modules de puissance, l'un basé sur les déformations et l'autre sur les dégradations |
|
Electronics instrumentations for the following ageing process and the diagnostic failure of the power semiconductor device. |
|
Establishment and comparison of two lifetime model dedicated to wire bonds damage in power modules, with an approach based on deformation and an approach based on degradation. |
|
Etude, conception et réalisation du BMS pour ‘Arizona Gym’ Beirut - Liban |
|
Etude de la fiabilité des composants soumis à des stress électriques conduits |
|
Etude de la Fiabilité des convertisseurs d'électronique de puissance intégrés dans un circuit imprimé PCB |
|
Étude de la robustesse de transistors GaN en régime de court-circuit |
|
Etude de l'intérêt de la montée en tension du bus DC pour minimiser les pertes dans l'onduleur d'un véhicule électrique |
|
Etude et conception d'une centrale éolienne couplée réseau électrique avec groupes électrogènes de secours : cas de l'hôtel Bénin Marina de Cotonou |
|
Etude et gestion de l'énergie électrique de l'hôpital HIRAM - Tyr |
|
Étude et mise en œuvre de modules de puissance MOSFET SiC pour leurs futures utilisations dans des convertisseurs ferroviaires |
|
Etude prospective de la topologie MMC et du packaging 3D pour la réalisation d'un variateur de vitesse en moyenne tension |
|
Evaluation de la fiabilité d'un générateur à rayons X pour application médicale |
|
Evaluation of the lifetime of commercial electronic power components subjected to several aging tests and determination of failure mechanisms. |
|
Extensive compact electrothermal characterization and modeling of the SiC MOSFET under extreme operating conditions including failure modes : application to the design of an integrated protection as close as possible to the gate driver. |
|
Fault-tolerant architecture of static converter for modular power-traction 30kW fuel cell generator. |
|
Functional integration of bidirectional switches (4Q) with application to AC-AC conversion. |
|
High density inverter using wide band gap switches. |
|
Implementation of accelerated ageing protocols for the study of IGBT power semiconductor devices under power cycling conditions. |
|
Intégration de l'alimentation de la commande rapprochée d'un interrupteur de puissance à potentiel flottant |
|
Intégration de micro-STEP solaire dans un contexte insulaire |
|
Intégration fonctionnelle autour des composants quatre quadrants Avec l’application à la conversion AC/AC |
|
Integration of micro PHES coupled with photovolatics in an island contex. |
|
Integration of the high side power sitch gate driver power supply. |
|
Modélisation et mise en oeuvre d’une chaîne de production éolienne à base de la MADA |
|
Multi-level and multi-physic automotive mechatronic system design : consideration of reliability constraint for power converters embedded in a hybrid. |
|
Onduleur à forte intégration utilisant des semi-conducteurs à grand gap |
|
Optimization of a High Power Reversible DC/DC Converter for Aircraft Application. |
|
Pilotage et surveillance de MOSFET SiC : intégration de fonctions intelligentes dans les gate drivers |
|
Prospective study on medium-voltage drive with MMC Topology and 3D packaging power modules. |
|
Réalisation d’une extension dans le poste 220/60/30 kV de Tiaret, Algérie |
|
Reliability assessment of an X-rays generator in medical application. |
|
Robustness study on GaN transistors for short-circuit operation. |
|
Study and implementation of SiC MOSFET power modules for future utilisation in railway converters. |
|
Study of silicon carbide devices for aeronautics applications. |
|
Study of the interest of the rise in the DC link voltage to minimize losses in the inverter of an electric vehicle. |
|
Study of the Reliability of Power Converters Integrated in a printed circuit board PCB. |
|
Study of the robustness of SiC JFET transistors under electrical stress. |
|
Système de gestion technique du bâtiment ‘‘Beit Beyrouth’’ |
|
Système de stabilisation de la tension batterie pour la fonction Stop-Start automobile : solution à composants de puissance commandés en linéaire |
|
Terminaisons verticales de jonction remplies avec des couches diélectriques isolantes pour des application haute tension utilisant des composants grand-gap de forte puissance |
|
Thermal Aging Of The Nanoporous Structure Of Sintered Ag Used As Bonding Material In Electronic Modules : In Situ Nanotomography, Influence of an Interface, and Simulation of the Mechanical Behavior. |
|
Thermomechanical fatigue of connections in power semiconductor modules.. |
|
Toward new integrated power modules. |
|
Use of low voltage GaN power semiconductors for the integration of electrical power converters aboard the aircraft. |
|
Utilisation de semi-conducteurs GaN basse tension pour l'intégration des convertisseurs d'énergie électrique dans le domaine aéronautique |
|
Vers de nouveaux modules de puissance intégrés |
|
Vertical termination filled with adequate dielectric on wide band-gap HVDC power devices. |
|
Vieillissement et mécanismes de dégradation sur des composants de puissance en carbure de silicium (SIC) pour des applications haute température |
|