Carburization and boriding of stainless steels in liquid sodium : chemical interaction between the control rods and boron carbides. |
|
Comportement en milieu oxydant d'un composite carbone/carbone pour applications structurales entre 150 et 400°c dans l'aéronautique civile |
|
Comportement et endommagement en fluage à haute température de parois minces en superalliage monocristallin MC2 : effets de l'oxydation et de l'application d'un revêtement MCrAIY |
|
Development and caracterization of turbine blade coating modelling of service lifetime |
|
Development of novel protective high temperature coatings on heat exchanger steels and their corrosion resistance in simulated coal firing environment. |
|
Développement de revêtements pour les aciers d'échangeurs thermiques et amélioration de leur résistance à la corrosion en environnement simulant les fumées de combustion et de charbon |
|
Dry corrosion prediction of radioactive waste containers in long term interim storage : mechanisms of low temperature oxidation of pure iron and numerical simulation of an oxide scale growth. |
|
Effects on adhesion mechanisms of prior-surface treatments before thermal spraying : Thermal barrier coating. |
|
Élaboration de revêtements γ-γ' et de systèmes barrière thermique par Spark Plasma Sintering : tenue au cyclage thermique et propriétés d'usage |
|
Étude de la carburation et de la boruration d'aciers inoxydables en milieu sodium : interaction entre la gaine et le carbure de bore |
|
Étude de la détérioration par oxydation haute température et interdiffusion de systèmes revêtement-superalliage à base de nickel. Prévision de durée de vie |
|
Etude de l'interdiffusion et de l'effet Kirkendall dans les alliages métalliques à base de nickel |
|
Etude de l'oxydation à chaud d'échantillons en alliage TA6V élaborés par fabrication additive. Conséquences sur les propriétés mécaniques. |
|
Etude des effets des préparations de surface avant projection thermique : application barrière thermique |
|
Etude et caractérisation de la résistance à la carburation pulvérulente d'un superalliage à base de nickel obtenu par fabrication additive |
|
Etude et développement de barrière de diffusion pour les sous-couches de système barrière thermique |
|
Étude expérimentale et modélisation de l'oxydation à haute température et des transformations de phases associées dans les gaines en alliage de zirconium |
|
Evaluate the contribution of the fuel cladding oxidation process on the hydrogen production from the reflooding during a potential severe accident in a nuclear reactor |
|
Évaluer la contribution du processus d’oxydation du gainage combustible sur la production d’hydrogène issue du renoyage lors d’un éventuel accident grave dans un réacteur nucléaire. |
|
Evolution of AM1/(Ni,Pt)Al/YPSZ thermal barrier coating system under thermo-mechanical fatigue conditions. |
|
Fabrication additive, nouvelle technique d'élaboration des alliages métalliques : impact de la microstructure sur la durabilité à haute température de l'acier AISI 316L |
|
Fonctionnalisation de surface de l'Inconel 625 élaboré par fabrication additive par fusion de lit de poudre |
|
High temperature mechanisms and kinetics of SiC oxydation under low partial pressures of oxygen : application to the fuel cladding of gas fast reactors. |
|
Hydrogen and water vapour effects on oxygen solubility and diffusivity in high temperature Fe-Ni alloys |
|
Impact of biomass composition on corrosion : case of the hydrotreatment of vegetable and waste oils to produce biofuels. |
|
Influence du cyclage thermique sur les comportements en oxydation-corrosion et en fluage de systèmes MCrAlY-superalliage à base de nickel |
|
Influence of water (vapour, liquid) and of the oxidation regime on the high temperature degradation of alumina-forming coatings on Ni-based superalloys. |
|
Interfacial strength measurement of EB-PVD Thermal Barrier Coatings by laser shock and development of a non-destructive test on turbine blade. |
|
Measurement and Evolution of the gradient of mechanical properties in MCrAlY coated MC2 nickel based superalloy system. |
|
Mécanismes et cinétiques d'oxydation du SiC à hautes températures et faibles pressions d'oxygène : application au gainage des réacteurs rapides à gaz |
|
Modeling of the interdiffusion and cyclic oxidation behavior of Ni-based superalloy |
|
Modélisation des phénomènes de corrosion du Zircaloy-4 sous mélanges oxygène-azote à haute température |
|
Modélisation des phénomènes de ségrégation dynamique dans les céramiques conséquences sur l'élaboration des poudres et des monocristaux d'alumine-alpha dopée |
|
Modelisation of kinetic demixing phenomena in ceramics ; consequences on the elaboration of doped alumina powders and single crystals. |
|
Modélisation statistique de la durée de vie des alliages Fe-Ni-Cr soumis à la corrosion à haute température en environnement UVEOM et metal dusting en installations Syngas. |
|
Modelling of Zircaloy-4 degradation in oxygen and nitrogen mixtures at high temperature. |
|
Oxidation and carburisation of model chromia-forming alloys in carbon dioxide. |
|
Oxidation and hydrogen pick-up of titanium alloys in primary coolant of pressurized water reactors : mechanisms, kinetics and impact on the mechanical behavior. |
|
Oxidation and stress corrosion cracking of a cold-worked stainless steel in PWR primary water : oxygen transient effects. |
|
Oxidation behavior of a 2D Carbon/Carbon composite for structural applications between 150 and 400°C in civil aviation. |
|
Oxidation et cation release of nickel base alloys in primary water : in situ measurements of kinetics and interpretations.. |
|
Oxydation à haute température d'alliages modèles Ni-25Cr, Influence des éléments mineurs Mn et Si sur les mécanismes de croissance des oxydes protecteurs |
|
Oxydation à haute température longue durée de trois alliages industriels à base de titane : effets de la microstructure, de l'environnement (azote et vapeur d'eau) et du cyclage thermique |
|
Oxydation et carburation d'alliages modèles chromino-formeurs dans le dioxyde de carbone |
|
Oxydation et corrosion sous contrainte d'un acier inoxydable écroui en milieu primaire des REP : effet des transitoires oxygénés |
|
Oxydation et prise d'hydrogène d'alliages de titane en milieu primaire de réacteur à eau pressurisée : mécanismes, cinétiques et effet sur le comportement mécanique |
|
Oxydation et relâchement des alliages base nickel en milieu primaire : dispositif de suivi in situ de la cinétique et interprétations |
|
Point defects in Cr2O3 and oxidation of a Ni-30Cr alloy at high temperature : experimental and numerical approaches. |
|
Prévision de la corrosion sèche des conteneurs de déchets radioactifs en condition d'entreposage : étude des mécanismes d'oxydation du fer à basse température et simulation numérique de la croissance d'une couche d'oxyde |
|
Quantification de la cinétique d'oxydation cyclique d'alliage alumino-formeur : modélisation Monté Carlo de l'écaillage et mise au point d'un nouvel appareil de thermogravimétrie cyclique |
|
Quantification of cyclic oxidation kinetics of alumina former alloys : spalling Monté Carlo modelling and development of a new cyclic thermogravimetry apparatus. |
|
Statistical lifetime modeling of FeNiCr alloys for high temperature corrosion in waste to energy plants and metal dusting in syngas production plants |
|
Study and caracterisation of the resistance to metal dusting of a nickel-based surperalloy obtained by additive manufacturing. |
|
Study and development of new coatings including a diffusion barrier for application on nickel based superalloys gas turbine blades. |
|
Study of damages and associated mechanisms occurring by high temperature oxidation and interdiffuion on coating/Ni-base superally systems. Lifetime prediction. |
|
Study of high temperature oxidation of titanium alloy Ti-6Al-4V fabricated by additive manufacturing. Consequences on mechanical properties. |
|
Study of microstructural modifications of nickel-based superalloys induced by plasma assisted nitriding. |
|
Study of oxidation and corrosion at high temperature for nickel based polycristalines alloys. |
|
Study of platinum effect on the oxidation behaviour of a thermal barrier coating system based on a NiCoCrAlYTa bond coating. |
|
Study of Pt-modified γ-γ' coatings fabricated by spark plasma sintering (SPS) for thermal barrier coating. |
|
Study of the interdiffusion and the Kirkendall effect in nickel-based alloys. |
|
Surface functionalization of Inconel 625 produced by powder bed fusion. |
|
Synthèse et propriétés thermochimiques de composites SiC/MAX |
|
Thermal barrier coatings performed by suspension plasma spraying : Development and characterization of low thermal conductivity microstructures. |
|